(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. J

    MF TO-35 generator rebuild kit

    You are correct! I found the same number on the bearing. I was going to order a completely sealed bearing. Thanks.
  2. J

    MF TO-35 generator rebuild kit

    Thanks for the replies. I took it apart this morning and the bearing is making a clicking/grinding sound when i spin it. Going to order the new parts. Whats the best way to clean the inside of the generator? I used a screwdriver to knock dirt loose and an air compressor to blow it out. I...
  3. J

    MF TO-35 generator rebuild kit

    I believe my Delco Remy generator/alternator bearing is going out. Sometimes I will get a random whine coming from it. I am getting a charge on my gauge from the generator so it is producing power. I used a mechanic stethoscope and confirmed the sound is coming from the generator. I can pull...
  4. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    So, I'm working on setting my throttle and is there supposed to be this much movement the the lever (see Pictures)? Only the first inch or so of movement actually does anything with the throttle and its very sensitive. This was like this before the engine rebuild as well. I'm trying to...
  5. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    Loud ticking noise is gone! I don't hear it anymore at least I don't think so. So, I re-adjusted the rocker arms and the ticking greatly reduced. so, I bought a whole new rocker arm assembly and the loud ticking is gone! Still need to get the throttle down. It's way too touchy. I followed...
  6. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    The clutch pressed or depressed, same sound. I've had the tractor 2 years now and it sounded and ran fine before this. Beside basic maintenance the only thing I had to do was replace the governor about a year and a half ago. It ran fine until this happen.
  7. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    I did not feel any play in the rod connection. Before putting the piston head on I slid the piston pin through each of the rods, and I didn’t feel any wiggling other than straight in and out. Because I didn’t feel any play, I kept the same sleeves in and none of them looked damaged. I checked...
  8. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    I did. The water pump is new and I have a replacement alternator/generator that hasn't been put on yet. The generator now has been making a noise for a few months, sequel/ grinding sound depending on how tight the belt is. I haven't put the new one on yet so i can return it if I cant get this...
  9. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    Well I have it back together and have a ticking/knocking sound. Nothing even close to what it was doing before the rebuild. I have used a stethoscope over every inch of the tractor and cannot get the sound to come through it. It is louder on the side of the exhaust. I do need to adjust the...
  10. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    I'm getting close to a point to where I could turn on my tractor, but the front axle and radiator isn't on yet. Can I run the engine for 15-30 seconds without coolant to see if it's running good? I don't want to pull the whole front axle assembly off again if I can avoid it. I did confirm the...
  11. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    Well after pulling a few muscles I didn't know I had, I finally got it on. Thanks for all the tips! Now I can finish putting it back together.
  12. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    There looks to be a stud in the front of the engine that can come out. Keep it in or take it out? I've tried both ways, but if i take it out I don't think I will be able to get it back in once the engine is on because its so short.
  13. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    Ill give it a try.
  14. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    I've looked up the bellhousing hole from the bottom, as my buddy tries to push the engine in, and it getting hung up when trying to slid into the larger PTO gear. Not sure if it matters, but I don't have the oil pan on at this point.
  15. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    I realigned everything with the tool today before trying again. Going to try again tomorrow.
  16. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    I took everything apart today and added the metal ring back. The two bearings that came with the clutch kit, one for the flywheel and the larger one that pushes on the clutch both fit.
  17. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    I realigned everything again today with the tool. I also made sure the new clutch assembly and flywheel bearing would fit on the gear shaft, before putting them on the crankshaft. We tried again today and kept getting stuck when it was time for the larger gear to slide in. Spun the engine and...
  18. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    Any tips for getting the engine to line up with the gears on the tractor? I'm having a fun time trying to get it to slide in. The new clutch assembly matches the old and I used the plastic tool to line up the teeth in the clutch before removing the 3 shipping bolts. I did my best to line up the...
  19. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    I'm at work, but here is an old pic. It's just dirty. I noticed what I thought was blowby. Thanks for confirming.
  20. J

    Massey Ferguson TO-35 Z-134 Violent banging sound.

    Thanks
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top