(800) 853-2651
SHOP NOW

Search results

Yesterday's Tractor Forums
  1. H

    YM 1500 Battery good, won't start

    All great info! Thanks very much.
  2. H

    YM 1500 Battery good, won't start

    I am having the same problem with my 1500 D I checked all my connections are tight I have 12 V from battery to starter to solenoid and still get nothing thinking voltage regulator. Any thoughts are appreciated.
  3. H

    1500D Knuckle seal mess

    Aaron, I did just that an found a bearing out of sequence, removed it and all is good thanks for all your help.
  4. H

    1500D Knuckle seal mess

    Aaron, can you please offer any insight?
  5. H

    1500D Knuckle seal mess

    Winston, Aaron installed the top bearing for me so it should be right. However, the lower unit will not even go up into the knuckle cover far enough to engage the drive gear in it. And yes the spindle does go up and through the knuckle cover. I noticed on the other side their is about a...
  6. H

    1500D Knuckle seal mess

    Winston, It is about a 3/4" gap between the upper and lower. Using your thought about the seal starting I took the whole unit off the tractor and made sure the top and bottom were line up. Put the Unit back on and using a jack , I basically lifted the whole front end in hopes that the...
  7. H

    1500D Knuckle seal mess

    Winston, I hope this helps: On the external drawing I am raising #39 Lower left hand knuckle housing up into the knuckle cover to mesh #54 and 44 to complete the repair. I remember from last time it would only fit one way but I can't seem to find that way. Any help would be appreciated, Paul
  8. H

    1500D Knuckle seal mess

    Winston, Saw you were online. Any thoughts on my question about getting the gears to mesh on the left side of my 1500D after knuckle seal replacement? thanks in advance for any thoughts, Paul
  9. H

    1500D Knuckle seal mess

    Aaron, thanks for the quick reply on my last post. So I am attempting to get everything back together and I forgot the trick to getting the gearbox and the axel gear to mesh. I have a jack under the gear box and have tried every angle and height, not sure why they won't mesh.. Thoughts...
  10. H

    1500D Knuckle seal mess

    Aaron and Winston, Ok hopefully last question. Aaron was kind enough to send me a new knuckle cover with the knuckle seal already installed as well as the knuckle cover seal and bearing. My question is from looking at the red 4wd internal drawing and seeing the placement of the LH top knuckle...
  11. H

    1500D Knuckle seal mess

    Thank you kind sir I will let you know what happens,
  12. H

    1500D Knuckle seal mess

    Hey Winston, Merry Christmas! Yes I have removed the axle from the knuckle cover, was worried the bearing in the knuckle cover would not come out, but I got it out. i am now waiting for my new knuckle cover to arrive, with the knuckle seal and the bearing already in it. Should I be able to...
  13. H

    1500D Knuckle seal mess

    Yeas that is correct
  14. H

    1500D Knuckle seal mess

    Sorry Winston, I am talking about the numbers on the Internal Red 4WD does that make sense now?
  15. H

    1500D Knuckle seal mess

    Ok guys maybe i have confused you, for that I apologize. I was having such a tough time getting the knuckle seal out I pulled out the axle with the knuckle cover so I could get at it better, so now I have an axle a knuckle cover attached to it with the gear #44 and the bearing #48 Keeping me...
  16. H

    1500D Knuckle seal mess

    Sorry Winston my bad, yes we are talking red. However my question relates to clip#47, bearing#48 and shaft#43 on the internal red diagram. Any thought would be appreciated, thanks!
  17. H

    1500D Knuckle seal mess

    Hey Winston glad to hear from you! I have been to the diagram and it looks like if i take the retainer clip off the shaft it should pull out correct? That solves one issue:) my other question is what is the best way to get the bearing in the knuckle cover out? Need to have that for the new...
  18. H

    1500D Knuckle seal mess

    Hi everyone, Both of my knuckle seals are leaking. I took the left one off first, only to find that the seal seems to be welded to the upper cover. I have tried everything I know to get it off. Upon closer inspection the cover must have got hit with a boulder or something ( I live in the...
  19. H

    YM1500D 4WD drive shaft grease zerks

    Aaron your thoughts? I hope it is generic and glad I asked and didn't take the guard off to find nothing,
  20. H

    YM1500D 4WD drive shaft grease zerks

    Winston, That is what i thought as well, but i was going over my ops manual again to make sure i hit all the grease points,( page 43 of the manual Hoye sold me)and under letter C it shows 2 points labeled "drive shaft joint". further thoughts? thanks!
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top