(800) 853-2651
SHOP NOW

Search results

  1. 2

    Tach cable lube

    Replacing the tach cable on my 2-105 4wd. This is the style with the plastic tab on the back of the tach head. Lots of replacement tach cables for the threaded nuts on both ends. My housing appears to be in good shape. My question is what everyone uses for tach cable lube that won't gum up in...
  2. 2

    Oliver 1800A Pto

    I was using my 1800A on a 3 pt. stump Grinder and the pto stopped and started grinding at back of engine. Pulled the shaft and it was stripped out in the last 1/8 inch of splines. Pulled the engine and the solid pto hub in flywheel was also stripped for 1/8 inch of about 1 inch engagement...
  3. 2

    Mixed fleet antifreeze recommendations

    I belong to my local Volunteer Fire and Ambulance Department as I think many other on this board do. I am in charge of maintenance for our vehicles. My question about the various types of antifreeze recommended by Cummins, Cat, Ford Diesel and Gas, Navistar, and GM gas. This has to be an issue...
  4. 2

    2-105 MFWD axle update

    This is an update to the question I had posted earlier about a bushing in the Clark axle on my 2-105. I did tear it down yesterday and found that there was not a bushing in this axle. I confirmed that the dimensions Jake Collie provided matched my axle. Thanks again Jake. My son is making the...
  5. 2

    Bushing in MFWD axle housing. Super 99?

    Watched a Youtube video last night posted by Super 99. Chris was changing an outer steering housing on "Herman" his 1950. During the video he talks about putting a bushing in the center housing behind the inner seal. I have to replace the inner seal on my 2-105 MFWD and would like to know more...
  6. 2

    My clover white recipe

    Cleaned up some dual bands and rim for my 1950. Picked up a gallon of Old 55 brand Gloss white and a quart of Meadow green at our local Fleet Farm. Mixed an ounce and quarter of green in the white or a ratio of 100-1. Will try to post pictures of the paint before and after. Steve
  7. 2

    Oliver 1950 build Card way off

    Just got the Build Card for my 1966 (I think) Oliver 1950. According to the Build Card was a retuned tractor after being sent to A Growing O show. but the Card shows it to be MFWD (its not). 23.1-34 tires (they are 18.4-38). 1000 only PTO (its dual speed). The Card also shows Crown Fenders, but...
  8. 2

    super 55 and 66 cylinder head : Update

    I had posted earlier about a cylinder head gasket leaking and possibly cracked. Took it into my local machine shop on Wed. afternoon. They were going to check it for cracks and then surface it if it wasn't cracked. Stopped back on Thur. afternoon and it was done. No cracks, and they had taken...
  9. 2

    super 55 and 66 cylinder head the same

    Pulled the head off a 66/super66 tractor I have this tractor has 2 serial numbers. The back half is a 1950, and the front is an 1954. The head gasket was leaking compression into cooling system so pulled off head. I can see where gasket was leaking between 2 and 3. while cleaning up head I can...
  10. 2

    Oliver 500 auction result

    Posted about a week ago about an Oliver 500 on an auction in North Central WI. The tractor had great tinwork but was not running. The final bid was $1076. Hope the tractor goes to a good home. At that price it won't go to the scrapper.
  11. 2

    Oliver 500 on auction NC WIS

    Just looked at online auction listing In North Central Wisconsin that has an Oliver 500. The listing can be viewed online at Hansenauctiongroup.com and ends Oct 4. Does Randy have room for another one?
  12. 2

    Cat 3126 problem

    I know a cat 3126 is not a tractor engine, but I think there is an answer to this problem among the experts on this forum. I am a member of the local volunteer fire dept. We have a 2003 Freightliner with a cat 3126 responding from our sub-station. A couple months back, I responded to an early...
  13. 2

    Hydraulic valves or couplers?

    Last few years been planting corn with a White 2-135 and John Deere 7000 6row planter. Finally got the hydraulics working well on my 2-105. Hooked the planter up and it lowers only if I feather the hydraulic lever. Would not lower on other set of valves. The hose chatter and lock up if I go too...
  14. 2

    Oliver cultipacker

    Bought an Oliver cultipacker at an auction last fall. Would like to use it this spring after planting soybeans. the 4x4 hitch is rotted off so I dont know the length . Can anyone send me a picture or ads of an Oliver cultipacker, or measure the length of the hitch. Will try to attach a picture...
  15. 2

    2-105 PTO pressure

    Just got the PTO working on my 2-105. While testing Pto pressure after the repair it is 200#. The spec is 240#. The pressure is adjusted with shim washers on a spool in the hydraulic control valve. Is this enough, or should I bump it up to 240#? Thanks for your thoughts. Steve.
  16. 2

    2-105 PTO rebuild

    Finally got the hydraulic issues with this tractor worked out over the summer. Was going to use it this fall to spread some fertilizer on next years (2022) corn ground. PTO turned but when fully engaged acted like it went back into brake and stopped. Used the 1800A to get fertilizer spread and...
  17. 2

    auction results central wi 200 tractors

    Just got home from large estate auction. The deceased owner went to a lot of auctions and bought whatever went cheap. All these were parked outside. The sheds are full with better stuff that will sell around Halloween. DNR = does not run White 6 btm onland hitch plow $950 White 4 btm 548 plow...
  18. 2

    Update; 2-105 poor hydraulics

    Have been working on my White 2-105 off and on for the last couple months. Bought this tractor a couple years ago at a consignment auction. The only other bidder on the tractor was the owner as I later found out. Tractor has always had low pressure. After buying a White service manual for the...
  19. 2

    estate auction 200 tractors central WI Sept. 25

    Just saw an auction bill for a large auction of mostly non running tractors. The Auction bill and several pictures are at christensensales.com. Not affiliated with them but they run a good auction. Preview is next week. I live about 25 miles away and might be able to get better picture for any...
  20. 2

    2-105 hydraulic relief valve shims

    Have been working on the hydraulics on my 2-105. Determined that the pump was worn based on low pressure and excessive flow from case drain. Now have a rebuilt pump on and presure is better but not 2200 psi. Took off the pressure control valve to remove the stripped plug for pressure gauge port...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top