(800) 853-2651
SHOP NOW

Search results

  1. M

    Looking for ideas for light weight front wheels.

    Real Racing wheels. They will bolt to the 6 lug hub
  2. M

    MM suit case weights

    go to the photo ads and search for "aluminum weights"
  3. M

    Vista parts

    If Michael doesn't have any good used pieces, CLint Stamm has most of that stuff reproduced.
  4. M

    External or internal oil pump?

    In this pic you can see the little pump mounted low on the engine. This is a transmission cooler pump. When it has the external oil pump, this little pump is replaced with the big pump shown in the other pictures. The external pump is the only ones with spin on oil filters, as the internal pump...
  5. M

    weld on hubs

    Find Docjoe on here, he makes some nice ones.
  6. M

    6 hole X 5.5 Pattern Aluminum Front Rims ???

    Aren't tractor hubs 6x6? If so then real racing wheels will make you a set in 15 or 16. If you have 6x5.5 trailer hubs or something, you will have to have Real or somebody custom make them most likely. There are a few alumimum wheels for boat traielrs and suct in 15x6. real racing wheels
  7. M

    5 Star fiberglass grill

    He's Mopower on here. Here is his number
  8. M

    Can the reg be too far from carb??

    go get a remote starter switch from the autoparts or make one. Then you can stand on the ground and spray either or make adjustments by yourself. Just make sure its in neutral and the clutch is disengaged. remote starter switch
  9. M

    elec ign for 310 waukesha

    These guys have great service and good pricing. just call them with your distributor number and they will match it up. I have have several pertronix ignitors and not had any go bad, I have seen one on another tractor go bad at a pull. THey seem reliable to me, just make sure and hook them up...
  10. M

    A4T-1600 glass

    Windshield Adheisive, you can get it at your auto parts stroe or place that sells replacement windshields. That adhiesive is all that holds a windsheild in a car anymore.
  11. M

    Tractor Pulling States ??

    We have a few different sleds running in Texas. There are 30+ pulls a year here.
  12. M

    big MM U

    x2 on the 5.75 x 7.5
  13. M

    Garden Tractor Serial Numbers

    Go on and load that up and bring it to Tunica in a few weeks. Ill pick it up there.
  14. M

    What's the best mm to buy

    I have not done any plowing with it, but it pulls real nice. Like all Moline engines it has plenty of torque. It has never gotten the front end up pulling. There is a lot of weight on the front with the engine and cast iron grille. You may need some weight on the front in heavy soil, but I don't...
  15. M

    What's the best mm to buy

    I have a 1355, and it is easy to drive, with excellent brakes and power steering. The three speed in the 1355 is a great upgrade over the ampli-torq in most molines. I haven't been around a 3 speed ampli-torq, but I know parts are hard to find for those, not so much with the oliver 3 speed. The...
  16. M

    Gear reduction starter for HD 800

    Have you looked at the Mack MP8 starter? It looks to be 12 tooth, I just can't see if it is the same mounting flange. Delco 44mt or 39mt should be easy to make work.
  17. M

    Keep A Spare furnace ignitor

    They all use a hot surface ignitor of some sort these days. The one you have is silcon carbide. There are upgraded ignitors that are silcon nitride. They tend to be more reliable and are what most manufacturers are going to. There are 120 volt and 24 volt ignitors, so its best to know what you have.
  18. M

    Someone please tell me I'm not the only one.....

    Clint, I've got a power block that will go in that A, with the pistons. I can bring it to Cuero this weekend. My email's open
  19. M

    Celebrities and Old Tractors

    I don't have any pics or anything, but John Conlee has several Allis Chalmers tractors.
  20. M

    need help please

    LW usually has them in stock. THere a little more but you don't have to wait 6 months. Lawrence Wilson-910-673-3505
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top