63 Case 530 loader control valve.

[Travwm]

Hi Guys, as always, I want to start by thanking everyone for the great forum and all of the information that you have all given me.
This time I have a sticking control valve for the loader and I wondered how much of a job it is to reseal it.
It looks like the control linkage goes to a valve approximately under the fuel tank.
Hopefully this sounds familiar and someone has done this. Thanks again. Trav

 

[Tgrasher]

Try taking a screw driver to pry the spool back and forth while spraying it with a penetrant. Use your other hand to pull on the linkage. Is your oil free of water? If this doesn't help then start putting penetrant on the roll pins.