B414/434 power steering

[550Doug]

I would like to put power steering on my 434. I assume it is the same unit as on a B414. Does anyone have a picture of a unit? and how difficult is this?

 

[495man]

I've read that the units will fit between B-414,434, 444, 384 with there being variances on the hydraulic pump one (dual system pump versus single)

I looked into it for a 276 but didn't go much further.

 

[JimB2]

Are you in Canada or USA? The 434 tractors delivered to Canada directly from UK had a different PS system than the crate units that went to Louisville, KY, USA for final assembly as they had a different
hydraulic setup and front end similar to the IH 404/504 Utility tractors. The Canadian B414,434,444 and 384 all had the same PS unit.
The other difference was the PS equipped tractors had the wishbone connected to the front axle back to the clutch housing to take the additional twist off the front axle pivot bolt caused by the PS.
I would assume the B275,276 series tractors would have the same PS setup. Everyone in our area of Canada had B414,434,444,384s.

 

[Fritz Maurer]

Have the complete system for a 424. PM me if
interested.

 

[nashranch]

I had a B-414 a few years back with Power Steering. Here's a pic of the steering cylinder