Back to trailer wiring

super99

Well-known Member
I posted last week about trailer brakes and lights issues. My tractor is 90 miles away and I need to get this fixed so I can haul it home.
cvphoto96905.jpg


cvphoto96906.jpg

This is the pigtail that plugs into the truck wiring harness and where it hooks into the trailer plug. One of the wires has been clipped off of the plug on the plug in side. I only have 3 wires coming into the socket along 2 wires,one ground and one for brakes. Im going to go get a new pigtail to go to the plug in for the trailer. I have 7 wires in the cable coming from the trailer and only 5 wires going into the plug on the truck. I dont know how it ever worked before the trailer cord came unplugged and dragged the end off of the cable.
cvphoto96909.jpg
 
Need to find out what the other 2 wires on the trailer do.

Typically only 5 are needed. left, right, running, brakes, and ground.

The white ground has been bypassed, so the clipped off wire is accounted for. There never was a brake wire on that plug, that's the blue one.

The only remaining 2 are back up lights, and aux power, which you may or may not need.
 
The extra blue is from the brake controller and the white is ground. I think the other 2 wires on the trailer side are for backup lites and aux power.
 
The plug from the truck is fine. The missing wire should be because your truck has separate brake/turn signals and trailers they are the same. There is a converter in that plug to change them over so the trailer works. Your problem is in the wiring in the plug and we can't see the end to advise on that.
 
in the last picture (with the 7 pin connectors) i believe you have them connected out of proper alignment. i believe you will find that the two notches either need to be aligned or 180 degrees apart.
 
Finally got it right!! All lights work as they should. In the wire from the trailer, the black wire is for brakes, not the blue wire. I dont have a clue what the blue and red wire are for, they are hooked up to spades that arent connecting to the truck, dont matter as long as brakes and lites work!!! Thanks for the help, Im worse than poor when it comes to wiring.
 
In Indiana rust belt you will need to cover all wire connections with something to keep the salt from rusting everything. My solution was to buy a molded plugs on both ends. Solder wires and protect the solder connection. Easier to protect solder connects vs the connections in plug. Just my experience. Molded plug wires aren't cheap. I got tired of fighting rust.
 
I'd be screwed since My plug is not of flat spades but like a semi with the round pins and my blue is for the oversize lights in back while the rest are about the same.
 
Well, that went to heck quickly!!! Started out and when I step on the brake pedal, it would lock up the trailer brakes. I readjusted according to the manual, it got better but still locked brakes when stepping on pedal. I tried just using the controller and it seemed to be okay. I got to blacktop and turned on the left turn signal and the brakes locked up. Turned around and came home and did some checking, no lights on trailer but truck lights work. Wondering if my controller is bad. I checked continuity of trailer cord to junction box on trailer and wires are good there . Im lost!!!
 
I forgot to add, before this episode, the trailer brakes only work with the controller, not the brake pedal. Now they only work with the brake pedal.
 
Yes it would seem that way, but if so, how come all the lights worked as they should before I left home? I had left and right turn signals and brake and running lights before I left home. I just remembered, when I got back and was checking lights, the running lights would light up when I pushed the brake pedal. If they were hooked up wrong, how did I get right and left turn signals, brakes and running lights working correctly before I left home and the brakes started locking up? I'm confused.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top