Farmall Super MTA

GT129

New User
I recently purchased a 54 super mta and had a few questions I was hoping someone could answer.
The first would be what oil should I buy to change whatever is currently in it, I saw a few post about people using 15-40 rotella oil but wasn't sure so could you tell me why you recommend whatever you do.

My gas tank is a little cruddy looking, so I was wondering how I would go about cleaning it up, I've heard about people using apple cider vinegar, but I wanted to ask before I screwed something up.

My last question would be how do i remove the actual filter element from the air box they sell the material so surely there's a way to do it anyways I appreciate any help i can get on this.

Thanks, George

This post was edited by GT129 on 01/10/2022 at 08:11 pm.
 
E-85 gas works pretty good for cleaning gas
tanks. I use 15-40 Rotella in all of mine, I
have been told it has a high zinc and is
better for the old flat tappet engines
 
What i use in my S/MTA is Case I H 30 weight low ash , been usen that in that tractor sine July 1990 When i change it the first time after i bought end of June that year. Use the same oil in all the gas I H tractors and personally have used it since 1969. On the one M i had the 460 gasser that came after my 450 D then into the 706's i had after that . But hey what do i know i only work on them.
 
Yep they did , Even up to the 1977 Cummins that i bought new , and ya know what that is what i run in it till i sold the truck . I ran the 30 Delo 400 in it and even though it was turned up way past factory spec.'s any problems i had with that engine was due to me pushing one Hp per cubic inch out of it far more then the 350 Hp that the factory set . I was making more pony power then a KTA 600 at the time and a KTA had 1150 Cubes over my 855 . In my life time of seeking pony pony power i have always gone beyond where no man has gone before . I have played the game of Oils probably long before you were out of three corner pants , dealt with every snake oil salesman that has come down the pike and pushed engines way past design , yup i have made a few spare parts . You bring me and engine that has failed and i can tell you where it all started . Infact if you were to go out to the local drag strip and walk the est side lane with a metal detector you will more then likely find pieces and parts from a 390 F E Ford still in the dirt . Nope i did not build that engine i Bought it . Per built and told she was good to 7000 . Well that was a lie as she let go at 6000 . That was the start of my engine building . I set out to build a F E block 390 that would flat out and run and when done she would run a 390 tri power with the best you could buy in 64 . it ran well enough to knock the socks off a 64 427 head up by four car length and kept on running like that . When i had that car down in Ga. while stationed down there it supplemented my PFC pay of 97 buck a month street racing and like one old sother boy asked me one night while steeling up he asked me if all them thar cars in the Buckeye ran this fast and i said oh no this is one of the SLOWER CARS. I even went heads to heads with a 66 dodge Charge with a 426 street hemi and got him three for three . As that 390 would put that 61 Ford Sunliner thru the quarter at 118.23 in a 11.56 . That was 4485 lbs of car with me in it . Yes i have built engines for others i also worked on the MoPars and Fords at two different dealerships one running a drag race program . So you get a feel for the lube of and engine . Building winning tractor engines that was a hoot as you had to rethink all you knew of going fast to going fast only to slow down as you went . Whole new ball game on tuning . I built five for first my accountant that myself and three others ran the same tractor in the 4500on up thru 7500 . I ran it in the 6500 class my accountant ran it in the 7500 class and for two years it was never beaten in any of the classes . each one of us won the points nd each one of us walked away with the top prize at each pull . Till we sold it to our competition as the old sayen goes if ya can't beat it BUY it . And we moved on to the next project and first outing at a national event we came in at 3rd and forth . As i did not have all the bugs worked out on this one as it was diesel . After that pull we knew what we had to do . i pulled first and my Accountant pulled second and i could see and hear more watching him make the pull . . So back to the oil The Case I H oil is one of the better oils out there and this is fact , yep it costs more BUT if ya get more hours out of and engine then the cost of the oil really does not cost that much . My S/MTA puts out 60 ponys , My one close friend's S/MTA puts out 92-94 ponys . We just rebuilt that one with some of the last pieces and parts out there back oh like 20 years ago now . His has the 8500 ft. pistons the stock 450 gas head the 450 cam and intake and it needs the high test gas . this along with the few teaks to the dist. and carb work on the feed grinder she will almost out do a 806 grinding corn thru the small screen . On a two row corn chopper and old i H one i saw her split the gear box wide open one night when Vernon went to show me he could run second gear . The engine came under load and opened the gov and the gear box split wide open . Nope nothing wrong with the gear box all bearings were good , gears all good , just could not take the force and the casting failed . That was the first time that tractor was rebuilt since 1956 when it burnt under a mounted picker and was totally rebuilt that is when it was first upgraded by his grand father . That tractor was Vernons main tractor for his dairy operation . Yep in my area we have / had a bunch of small dairy operations , My main stay and income . we have five S/MTA's not counting mine that were everyday tractors . none of the new high priced fancy one . lots of 560 and 460's many old M's a few 806's and 856's a couple 1256's for the guys milking or were milking 60 plus head . and they all ran I H oil either the low ash or the # 1 Diesel . I had vary few engine issues to deal with . Mostly T/a's and hyd. and a few injection and electrical issues . My close friend and his 1066 that was one of my auction finds that he bought off me some some gee's thirty years ago now i have rebuilt the rear end fixed a couple hyd. issues a starter and alt. some light problems and now needs a new clutch and could use a new T/A . But the engine is still strong with vary little blow by and has the wick turned up BIG TIME and a much larger hair drier on it then factory and putting out well over 200 Hp. , real close to one half Hp. to Cu . In. Yep that one runs on I H # 1 Diesel 30 weight . it will haul 5x16's way faster then you can set in the set . It will pull five parabolic DMI deep till rippers with the 7.5 inch points at 14 inches deep in or clay in first high when the DMI block man told us there was no way a 1066 could do this . He was wrong . This is why i use the Case I H Oil and so does everyone around here with and I H tractor .
 
Are there any snake oils that are any good?? The manufacturers claim that the tractor oil is better than oil for over the road trucks . I would sure like to do come see all your tractors you have built but I never get time to get more than a day from home . Any tractor that can pull a ripper that big has a lot of power I can stop a 225 horsepower track tractor in its tracks with a 7 shank potato row mark out bar in our ground .
 
(quoted from post at 00:47:17 01/11/22) Yep they did , Even up to the 1977 Cummins that i bought new , and ya know what that is what i run in it till i sold the truck . I ran the 30 Delo 400 in it and even though it was turned up way past factory spec.'s any problems i had with that engine was due to me pushing one Hp per cubic inch out of it far more then the 350 Hp that the factory set . I was making more pony power then a KTA 600 at the time and a KTA had 1150 Cubes over my 855 . In my life time of seeking pony pony power i have always gone beyond where no man has gone before . I have played the game of Oils probably long before you were out of three corner pants , dealt with every snake oil salesman that has come down the pike and pushed engines way past design , yup i have made a few spare parts . You bring me and engine that has failed and i can tell you where it all started . Infact if you were to go out to the local drag strip and walk the est side lane with a metal detector you will more then likely find pieces and parts from a 390 F E Ford still in the dirt . Nope i did not build that engine i Bought it . Per built and told she was good to 7000 . Well that was a lie as she let go at 6000 . That was the start of my engine building . I set out to build a F E block 390 that would flat out and run and when done she would run a 390 tri power with the best you could buy in 64 . it ran well enough to knock the socks off a 64 427 head up by four car length and kept on running like that . When i had that car down in Ga. while stationed down there it supplemented my PFC pay of 97 buck a month street racing and like one old sother boy asked me one night while steeling up he asked me if all them thar cars in the Buckeye ran this fast and i said oh no this is one of the SLOWER CARS. I even went heads to heads with a 66 dodge Charge with a 426 street hemi and got him three for three . As that 390 would put that 61 Ford Sunliner thru the quarter at 118.23 in a 11.56 . That was 4485 lbs of car with me in it . Yes i have built engines for others i also worked on the MoPars and Fords at two different dealerships one running a drag race program . So you get a feel for the lube of and engine . Building winning tractor engines that was a hoot as you had to rethink all you knew of going fast to going fast only to slow down as you went . Whole new ball game on tuning . I built five for first my accountant that myself and three others ran the same tractor in the 4500on up thru 7500 . I ran it in the 6500 class my accountant ran it in the 7500 class and for two years it was never beaten in any of the classes . each one of us won the points nd each one of us walked away with the top prize at each pull . Till we sold it to our competition as the old sayen goes if ya can't beat it BUY it . And we moved on to the next project and first outing at a national event we came in at 3rd and forth . As i did not have all the bugs worked out on this one as it was diesel . After that pull we knew what we had to do . i pulled first and my Accountant pulled second and i could see and hear more watching him make the pull . . So back to the oil The Case I H oil is one of the better oils out there and this is fact , yep it costs more BUT if ya get more hours out of and engine then the cost of the oil really does not cost that much . My S/MTA puts out 60 ponys , My one close friend's S/MTA puts out 92-94 ponys . We just rebuilt that one with some of the last pieces and parts out there back oh like 20 years ago now . His has the 8500 ft. pistons the stock 450 gas head the 450 cam and intake and it needs the high test gas . this along with the few teaks to the dist. and carb work on the feed grinder she will almost out do a 806 grinding corn thru the small screen . On a two row corn chopper and old i H one i saw her split the gear box wide open one night when Vernon went to show me he could run second gear . The engine came under load and opened the gov and the gear box split wide open . Nope nothing wrong with the gear box all bearings were good , gears all good , just could not take the force and the casting failed . That was the first time that tractor was rebuilt since 1956 when it burnt under a mounted picker and was totally rebuilt that is when it was first upgraded by his grand father . That tractor was Vernons main tractor for his dairy operation . Yep in my area we have / had a bunch of small dairy operations , My main stay and income . we have five S/MTA's not counting mine that were everyday tractors . none of the new high priced fancy one . lots of 560 and 460's many old M's a few 806's and 856's a couple 1256's for the guys milking or were milking 60 plus head . and they all ran I H oil either the low ash or the # 1 Diesel . I had vary few engine issues to deal with . Mostly T/a's and hyd. and a few injection and electrical issues . My close friend and his 1066 that was one of my auction finds that he bought off me some some gee's thirty years ago now i have rebuilt the rear end fixed a couple hyd. issues a starter and alt. some light problems and now needs a new clutch and could use a new T/A . But the engine is still strong with vary little blow by and has the wick turned up BIG TIME and a much larger hair drier on it then factory and putting out well over 200 Hp. , real close to one half Hp. to Cu . In. Yep that one runs on I H # 1 Diesel 30 weight . it will haul 5x16's way faster then you can set in the set . It will pull five parabolic DMI deep till rippers with the 7.5 inch points at 14 inches deep in or clay in first high when the DMI block man told us there was no way a 1066 could do this . He was wrong . This is why i use the Case I H Oil and so does everyone around here with and I H tractor .
ntil now, I took you seriously. But after this Johnny Walker inspired bragatto, I will no longer buy it.
 
My understanding is that ethanol is a very good solvent, and that's why it can gum things up.... it loosens up the varnish and other junk from the good gas that has been stuck in tanks, filter bodies, line etc for the past 40 plus years, and then the stuff has to go somewhere. Put the stuff in a clean system, and you have a lot less problems.
 
The 15w-40 diesel oil is an excellent substitute. It is better formulated for
the old flat tappet engines than the new gas engine oils. Gas engine oils
designed for roller cams and emission systems.

As for the gas tank, if it's just dirty or has sat with old gas in it, try
dumping it and putting some E85 gas in, along with a section of clean chain,
and tumble it around. Remove the fuel valve first so not to break the screen
off. Rinse it out, blow it dry, and see what you have.

If it was rusty, you may have a tank that now leaks! But trying to live with a
rust flaking tank is a loosing proposition. It will eventually have to be
replaced or rebuilt.

On replacing the filter element, it's good you found that! Many people don't.
Some are easy to get apart, some have to be cut apart, depends on the design.
If it can't be washed out, it will have to come apart, just have to do what
you have to do...
 
You do not remove the "filter element" from the airbox. It is welded in place permanetly.

That is a Donaldson oil bath air cleaner. How it works is the bottom cup is filled to the marked line with CLEAN oil. When the engine sucks air it sucks it through the oil and the mesh. The oil coats the mesh and the dirt sticks to the oil. When the engine is shut off the oil drains down and washes the dirt into the cup. The oil in the cup should be changed "daily" which assumes the tractor goes out to the field when the sun comes up and comes back when the sun goes down 12-14 hours later.

Now before you get all panicky and want to put a "real" air filter on it, remember the tractor is SIXTY-EIGHT YEARS OLD, and it's had this oil bath air cleaner since it was new. The tractor was operated for 12-14 hours a day for weeks on end in extremely dusty conditions during that time, and it is STILL RUNNING. How awful can this antiquated system possibly be?

If you feel you must clean it, you can flush it out with your favorite solvent, but for what you will run this tractor, there is no need to reinvent the wheel.
 
I have removed and cleaned the element from many of those oil bath
air cleaners. So it just depends on how dirty they are as to
weather it needs to be taken apart or not.

You can steam clean or soak them until you turn green in the face
and then take them apart and see all the crud you still have in
there

The problem with oil bath air cleaner is that they gradually let
that crud work it's way through the dirtier it gets. And they
channel along the edges making a path for the crud. Corn husks are
the worse for making a path.

Don't be afraid to take one apart.
 
Those air cleaners must have been pretty good, because I will bet that most only got changed when the oil was changed on the tractor, which
could be from ?? to ?? hours or yearly. And many of those are still running
 
(quoted from post at 07:29:25 01/11/22)
(quoted from post at 00:47:17 01/11/22) Yep they did , Even up to the 1977 Cummins that i bought new , and ya know what that is what i run in it till i sold the truck . I ran the 30 Delo 400 in it and even though it was turned up way past factory spec.'s any problems i had with that engine was due to me pushing one Hp per cubic inch out of it far more then the 350 Hp that the factory set . I was making more pony power then a KTA 600 at the time and a KTA had 1150 Cubes over my 855 . In my life time of seeking pony pony power i have always gone beyond where no man has gone before . I have played the game of Oils probably long before you were out of three corner pants , dealt with every snake oil salesman that has come down the pike and pushed engines way past design , yup i have made a few spare parts . You bring me and engine that has failed and i can tell you where it all started . Infact if you were to go out to the local drag strip and walk the est side lane with a metal detector you will more then likely find pieces and parts from a 390 F E Ford still in the dirt . Nope i did not build that engine i Bought it . Per built and told she was good to 7000 . Well that was a lie as she let go at 6000 . That was the start of my engine building . I set out to build a F E block 390 that would flat out and run and when done she would run a 390 tri power with the best you could buy in 64 . it ran well enough to knock the socks off a 64 427 head up by four car length and kept on running like that . When i had that car down in Ga. while stationed down there it supplemented my PFC pay of 97 buck a month street racing and like one old sother boy asked me one night while steeling up he asked me if all them thar cars in the Buckeye ran this fast and i said oh no this is one of the SLOWER CARS. I even went heads to heads with a 66 dodge Charge with a 426 street hemi and got him three for three . As that 390 would put that 61 Ford Sunliner thru the quarter at 118.23 in a 11.56 . That was 4485 lbs of car with me in it . Yes i have built engines for others i also worked on the MoPars and Fords at two different dealerships one running a drag race program . So you get a feel for the lube of and engine . Building winning tractor engines that was a hoot as you had to rethink all you knew of going fast to going fast only to slow down as you went . Whole new ball game on tuning . I built five for first my accountant that myself and three others ran the same tractor in the 4500on up thru 7500 . I ran it in the 6500 class my accountant ran it in the 7500 class and for two years it was never beaten in any of the classes . each one of us won the points nd each one of us walked away with the top prize at each pull . Till we sold it to our competition as the old sayen goes if ya can't beat it BUY it . And we moved on to the next project and first outing at a national event we came in at 3rd and forth . As i did not have all the bugs worked out on this one as it was diesel . After that pull we knew what we had to do . i pulled first and my Accountant pulled second and i could see and hear more watching him make the pull . . So back to the oil The Case I H oil is one of the better oils out there and this is fact , yep it costs more BUT if ya get more hours out of and engine then the cost of the oil really does not cost that much . My S/MTA puts out 60 ponys , My one close friend's S/MTA puts out 92-94 ponys . We just rebuilt that one with some of the last pieces and parts out there back oh like 20 years ago now . His has the 8500 ft. pistons the stock 450 gas head the 450 cam and intake and it needs the high test gas . this along with the few teaks to the dist. and carb work on the feed grinder she will almost out do a 806 grinding corn thru the small screen . On a two row corn chopper and old i H one i saw her split the gear box wide open one night when Vernon went to show me he could run second gear . The engine came under load and opened the gov and the gear box split wide open . Nope nothing wrong with the gear box all bearings were good , gears all good , just could not take the force and the casting failed . That was the first time that tractor was rebuilt since 1956 when it burnt under a mounted picker and was totally rebuilt that is when it was first upgraded by his grand father . That tractor was Vernons main tractor for his dairy operation . Yep in my area we have / had a bunch of small dairy operations , My main stay and income . we have five S/MTA's not counting mine that were everyday tractors . none of the new high priced fancy one . lots of 560 and 460's many old M's a few 806's and 856's a couple 1256's for the guys milking or were milking 60 plus head . and they all ran I H oil either the low ash or the # 1 Diesel . I had vary few engine issues to deal with . Mostly T/a's and hyd. and a few injection and electrical issues . My close friend and his 1066 that was one of my auction finds that he bought off me some some gee's thirty years ago now i have rebuilt the rear end fixed a couple hyd. issues a starter and alt. some light problems and now needs a new clutch and could use a new T/A . But the engine is still strong with vary little blow by and has the wick turned up BIG TIME and a much larger hair drier on it then factory and putting out well over 200 Hp. , real close to one half Hp. to Cu . In. Yep that one runs on I H # 1 Diesel 30 weight . it will haul 5x16's way faster then you can set in the set . It will pull five parabolic DMI deep till rippers with the 7.5 inch points at 14 inches deep in or clay in first high when the DMI block man told us there was no way a 1066 could do this . He was wrong . This is why i use the Case I H Oil and so does everyone around here with and I H tractor .
ntil now, I took you seriously. But after this Johnny Walker inspired bragatto, I will no longer buy it.

Regular ring-tailed wonder ain't he?
 
I had a 1971 Ford Torino I bought used in 1973. In 1974 I started burning E10 in it. I had to replace the fuel filter about 4 times in the first 2 months of E10 use. After that the gas tank was clean of the old residue from regular gas and never had a problem with that car. Since then I have never had a problem with any vehicle burning E10. I would hate to guess how vehicles and tractors between my father and I we used E10 Maybe 50? I even use E10 in small engines without problems except one. I had a pickup tube in a chainsaw collapse in a 10 year old saw 30 years ago.

I have a MTA the runs about 3 hours a year on E10. There are times I go 3 years without adding any new gas to it and it starts and runs fine every summer. When I bought it 30 years ago I had to clean the tank as it was all rust and gunk inside. No problems since.

When is that last time you saw the gas additive Heat sold or used? E10 will take the moister in tanks and put it in suspension and carry it out the exhaust.

Here in Iowa we have been using E10 since 1974 and you never hear of E10 causing any issues from mechanics.

My point is if you start with a clean tank it will stay clean with E10.
 
Regarding the air filter, if it is clear enough for it to
run without choking the engine, I would just try
filling it with oil and trying it for awhile. As B-Y says,
they have a tendency to clean themselves when at
rest, as the oil drips out of the media it carries the
dirt with it. The reason it is like that to begin with, is
going for years without servicing; all the oil has left
the cup through the form of vapor, leaving the
system dry. With no oil dripping from the media, the
dirt just stays there.
If your filter is too far gone,
drill out the spot welds and remove the bottom
retainer. Unless the media is damaged or rusty,
there is no reason to replace it. Just unwind it and
lay it out flat , and run it through a shallow pan of
hot water and Dawn detergent. Do not be
concerned about every last spec, as the action of
the air cleaner will take care of any minute
pieces.To get it back in the housing, find a piece of
PVC the same size or slightly larger than the center
tube. Wind the media around the tube, rather tightly,
and it can be easily inserted into the housing. You
do not even need to re-weld the retainer, you will
find it just snaps back into place and nothing more
need be done with it.
 
If they got changed when the oil got changed they were doing pretty well. Most got changed seasonally at best. I've bought a couple of older vehicles and tractors and the first thing I did was all the maintenance work that appeared to have been neglected for years (decades?). The worst being a 350 Farmall that dirt up to the wire mesh filter. This tractor had seen minimal use for years so the dirt had to be a decade old - given the condition its possible the oil in the crank was very old too. The dirt in the very bottom of the canister was very hard had to be scraped out with a screw driver.

I have cleaned the mesh by letting it soak in a bucket of gas for a couple days then sloshing it around to to rinse it. Cleans them up pretty decent. The manual says to use the same oil in the air filter as what's in the crank case - I use Mercon V auto transmission fluid - very heavy detergents to clean the air and the filter mesh if it been neglected.

I've never read anything about changing the oil in the air filter system daily.
 
Is this something recent? The information I have indicates that Case IH Acela Nexplore is a product manufactured by Petronas Lubricants International and distributed in
the northern US by Viscosity Oil Company of Willowbrook, Il. I can't find any connection between Shell Oil and Petronas. Petronas is headquartered in Kuala Lampur,
Malaysia.
 
An M doesn't need zinc. The valve springs have nowhere near the tension of high performance engines and the original oil back in the 1950s never had it as part of the additive package either - most were using nondetergent oil with minimal refining. Any modern quality 10W30, 10W40 or 15W40 engine oil will work fine in the 1950s and older machines. They were made to run on low octane fuel and have a very low compression ratio. They are a product of their era when fuel and oil were not that great and farmers were pinching every penny they could. Many of these tractors were being maintained by men that grew up using horses and mules for HP and the technology employed was geared towards their abilities. What is amazing is how stout these machines are and how common it is to see a 60-90 year old tractor still running today with minimal maintenance. Cars and trucks of the same era are rare and treated with kid gloves to keep running as playthings and entertainment - let alone used as they were meant to be used.
 
(quoted from post at 11:16:25 01/11/22)
(quoted from post at 07:29:25 01/11/22)
(quoted from post at 00:47:17 01/11/22) Yep they did , Even up to the 1977 Cummins that i bought new , and ya know what that is what i run in it till i sold the truck . I ran the 30 Delo 400 in it and even though it was turned up way past factory spec.'s any problems i had with that engine was due to me pushing one Hp per cubic inch out of it far more then the 350 Hp that the factory set . I was making more pony power then a KTA 600 at the time and a KTA had 1150 Cubes over my 855 . In my life time of seeking pony pony power i have always gone beyond where no man has gone before . I have played the game of Oils probably long before you were out of three corner pants , dealt with every snake oil salesman that has come down the pike and pushed engines way past design , yup i have made a few spare parts . You bring me and engine that has failed and i can tell you where it all started . Infact if you were to go out to the local drag strip and walk the est side lane with a metal detector you will more then likely find pieces and parts from a 390 F E Ford still in the dirt . Nope i did not build that engine i Bought it . Per built and told she was good to 7000 . Well that was a lie as she let go at 6000 . That was the start of my engine building . I set out to build a F E block 390 that would flat out and run and when done she would run a 390 tri power with the best you could buy in 64 . it ran well enough to knock the socks off a 64 427 head up by four car length and kept on running like that . When i had that car down in Ga. while stationed down there it supplemented my PFC pay of 97 buck a month street racing and like one old sother boy asked me one night while steeling up he asked me if all them thar cars in the Buckeye ran this fast and i said oh no this is one of the SLOWER CARS. I even went heads to heads with a 66 dodge Charge with a 426 street hemi and got him three for three . As that 390 would put that 61 Ford Sunliner thru the quarter at 118.23 in a 11.56 . That was 4485 lbs of car with me in it . Yes i have built engines for others i also worked on the MoPars and Fords at two different dealerships one running a drag race program . So you get a feel for the lube of and engine . Building winning tractor engines that was a hoot as you had to rethink all you knew of going fast to going fast only to slow down as you went . Whole new ball game on tuning . I built five for first my accountant that myself and three others ran the same tractor in the 4500on up thru 7500 . I ran it in the 6500 class my accountant ran it in the 7500 class and for two years it was never beaten in any of the classes . each one of us won the points nd each one of us walked away with the top prize at each pull . Till we sold it to our competition as the old sayen goes if ya can't beat it BUY it . And we moved on to the next project and first outing at a national event we came in at 3rd and forth . As i did not have all the bugs worked out on this one as it was diesel . After that pull we knew what we had to do . i pulled first and my Accountant pulled second and i could see and hear more watching him make the pull . . So back to the oil The Case I H oil is one of the better oils out there and this is fact , yep it costs more BUT if ya get more hours out of and engine then the cost of the oil really does not cost that much . My S/MTA puts out 60 ponys , My one close friend's S/MTA puts out 92-94 ponys . We just rebuilt that one with some of the last pieces and parts out there back oh like 20 years ago now . His has the 8500 ft. pistons the stock 450 gas head the 450 cam and intake and it needs the high test gas . this along with the few teaks to the dist. and carb work on the feed grinder she will almost out do a 806 grinding corn thru the small screen . On a two row corn chopper and old i H one i saw her split the gear box wide open one night when Vernon went to show me he could run second gear . The engine came under load and opened the gov and the gear box split wide open . Nope nothing wrong with the gear box all bearings were good , gears all good , just could not take the force and the casting failed . That was the first time that tractor was rebuilt since 1956 when it burnt under a mounted picker and was totally rebuilt that is when it was first upgraded by his grand father . That tractor was Vernons main tractor for his dairy operation . Yep in my area we have / had a bunch of small dairy operations , My main stay and income . we have five S/MTA's not counting mine that were everyday tractors . none of the new high priced fancy one . lots of 560 and 460's many old M's a few 806's and 856's a couple 1256's for the guys milking or were milking 60 plus head . and they all ran I H oil either the low ash or the # 1 Diesel . I had vary few engine issues to deal with . Mostly T/a's and hyd. and a few injection and electrical issues . My close friend and his 1066 that was one of my auction finds that he bought off me some some gee's thirty years ago now i have rebuilt the rear end fixed a couple hyd. issues a starter and alt. some light problems and now needs a new clutch and could use a new T/A . But the engine is still strong with vary little blow by and has the wick turned up BIG TIME and a much larger hair drier on it then factory and putting out well over 200 Hp. , real close to one half Hp. to Cu . In. Yep that one runs on I H # 1 Diesel 30 weight . it will haul 5x16's way faster then you can set in the set . It will pull five parabolic DMI deep till rippers with the 7.5 inch points at 14 inches deep in or clay in first high when the DMI block man told us there was no way a 1066 could do this . He was wrong . This is why i use the Case I H Oil and so does everyone around here with and I H tractor .
ntil now, I took you seriously. But after this Johnny Walker inspired bragatto, I will no longer buy it.

Regular ring-tailed wonder ain't he?

LOL. That must have been good. I didn't take time to read that 5 page page comment.
 
You drain out the E-85 while all the crud and gunk is still suspended in the E-85. If you let the E-85 evaporate on its own, all the crud and gunk is left behind to harden again. Similar to why we change oil while engines are still hot before the suspended crud has a chance to settle out of the oil.
 
You would ask me that , i do not remember the name , but i could drive you to the plant . Use to go past it often when i was hauling C F C salt to Bloomington Il. , it's off the left side of I 80 .
 
Use whatever brand of oil you want.
And whatever weight is acceptable in
your region.
Just rinse out tank with fresh gas.
Don't get to picky on that. Any tar or
crud in thier will likely dissolve and
delute into fresh gas and be gone over
time anyways. Add small amounts to gas
tank to start out with. Don't just
fill the dang thing clear up right
from the get go. That way your gas to
carb gets a little better as you go
along, without having to burn up a
whole tank of gas first.
Your tractor should be equiped with an
oil bath air cleaner. All you need to
do to those, is change oil in the cup
at the bottom, and clean that cup out
during the process.
 
And just how mqany power valves and acc. pump diaphragms did you replace in that Motor craft carb . They do not like AL-KI-hol and it will eat them out just like on the Holleys . I remember all th issues we were having around here when Clark Oil started putting AL-KI-HOL in there gas back in the seventys . That company only offered one grade of gas and sold it at reg gas prices . At first it was great they offered a 105octane gas at low reg . gas prices . The gas ran vary well in the performance cars of the day sporting 10- 10.5 even on up to 12 to 1 compression ratios . and you could buy it for THREE CENTS a gallon less then other stations . around 72 -73 we as in everyone in the automotive ind. were starting to have problems wwith the Autolite/ Motor caft and holley carbs with hard starting and flat spots on acceleration stumbling and backfires thru the carb some leading to engine fires . Upon questing customers as how's gas they were buying everyone told us they used the Clark and it was found to have AL-KI-Hol in it and that ate the acc. pumps and power vale rubber . Holley did offer those two items that were safe to use with Al-KI-HOL . The only AL-KI-HOL i like comes in a velvet Black bag and is best with or with out ice. And Min. amount served is two fingers spread WIDE in a large glass.
 
Viscosity Oil Company, based in Illinois, is the nothern US distributer but the manufactuerer is Petronis Lubricants International based in Kuala, Lampur, Malayasia. Akcela Nexplore is the name brand used.
 
air cleaner

cvphoto113723.jpg


cvphoto113724.jpg
 
Never had carb issues in any except a 1979 F150 when it got to 165K. Had to rebuild the carb or I put on a new Carb can't remember.

You may not like E10 but around here most everyone burns it in their older cars and tractors.

74 IH pickup, 76 F600, 79 F150 have all burnt E10 since new and I can go start anyone of them today.

It works for me.
 
Thanks for all the responses I tried to add some pictures of the tank but it doesn't let me submit when they are attached
I'm just going to leave the air cleaner alone for now and I've decided to use 15w-40 rotella for oil
 
If you are really concerned about the air cleaner take it off the tractor and physically clean the cup and intake tube, then put kerosene or
diesel or gas in the cup and give the whole unit a darn good shaking with rags in the 2 openings. Change fluid and repeat until your
fluid is clean. The unit should be as clean inside as the day it was new.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top