Front loader on a 3010

[David Michael Hoover]

My 3010 1960 model has 2 extra hydraulic levers and 4 plug mins. I am building a front loader based on the 46A JD loader. Can those 2 levers be used to control the loader?

 

[Roger in Iowa]

Yes.

 

[Tx Jim]

Yes but Fel will operate faster/better if an independent hyd valve designed for closed-center hyd system is utilized returning oil directly to tractor rockshaft return oil galley or ported hyd filter housing. 2nd photo is where to attach control valve pressure oil. Every time 3010 traction clutch pedal is depressed trans pump ceases to pump trans oil.

 

[David Michael Hoover]

Thanks i will try that

 

[Tx Jim]

You're welcome

 

[Farmall m farmer]

I would not use the SCVs on the tractor to run a loader are 4320 was set up that way and it wore out both SCVs and there not cheap to rebuild it would be cheaper to have a second loader valve