I inhereted this 1948 B that had been sitting for a couple decades. I briefly got it running, but the carburetor was frozen and only the choke worked to modulate RPM.
So I put on a new carburetor Then it wouldnt start, no spark.
So I rebuilt the magneto, new plug wires, new 12 volt coil, new condenser and resistor. Basically an entirely new electrical system. I lined up the timing marks on the flywheel and set the magneto, and it fired up easy.
It sounds like its running on both cylinders and the throttle works pretty well unloaded.
(More to come. Forum filter is hung up on some nebulous term so I have to compartmentalize my thoughts)
So I put on a new carburetor Then it wouldnt start, no spark.
So I rebuilt the magneto, new plug wires, new 12 volt coil, new condenser and resistor. Basically an entirely new electrical system. I lined up the timing marks on the flywheel and set the magneto, and it fired up easy.
It sounds like its running on both cylinders and the throttle works pretty well unloaded.
(More to come. Forum filter is hung up on some nebulous term so I have to compartmentalize my thoughts)