JD 2640 hyd, Is this normal?

cjk

Member


Today while stopped to reposition the discbine for a new field (nose down on a small hill)I lost all the hyd, even the steering. Checked hyd fluid, just a touch low but still on the stick. Got a ride home and got more fluid, added another gallon and still no hyd. Decided to drop discbine and take tractor home to investigate. After backing up 20ft or so steering comes back and all is well. Mowed the field without issue and drove home.

Is this normal? Ive noticed with the 542 loader on and a FULL bucket, sometimes after stopping to dump a load or reload, the steering sometimes drops out and then comes back after traveling several yards. Kind of like the pump is driven by the drive axle.

Any ideas guys? This is the only tractor we have and need to have it running reliably. If something is wrong I want to fix it NOW before it gets more $$$$$.
 

The last JD I had was a 2010 so I'm no expert, but AFAIK JDs of that age have a priority valve which gives priority to the steering. Perhaps there is some issue with the valve. I've had trouble on other tractors plus the 2010 with dirty hydraulic oil filters so I would start there, getting the simple things out of the way first.

BTW, I like the looks of the 2640. Seems to have a good combination of HP in a compact package. However, I've had to turn down the idea of getting one since the clutch is a little stiff and in an awkward place for my bum left knee.

KEH
 

I have 40hrs on all new fluid and filters, just changed it this spring. I will check into the priority valve.

Thanks.
 

cjk
I agee with Bob it's definitely not the priority valve.

It's possible the stroke control valve in the main hyd pump temporarily stuck open causing lose of hyd pressure.
 
Does the tractor have Hi-Lo? Does it work properly? What about the PTO?

If there was a problem with either of those I'd say the problem is related to the charge pump or a leak in that system... but given that it seems intermittent, I'd guess that it's in the stroke control on the main pump.

At this point in time I think you either need someone well versed in the workings of that hydraulic system to have a look at it or else start investing in DEERE service manuals if you're going to DIY.... You're only going to get so much understanding of it reading comments on here... and you really need to understand it fully if you're going to fix it.

Rod
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top