John Deere 71 corn sheller

tomstractorsandtoys

Well-known Member
We finally got the 71 back together after fixing a bad shaker drive and replacing 4 bearings. Shelled about 800 bu so far and hope to finish the crib today. Goes slow working alone as I have to stop and empty the cobs out of the manure spreader twice for every load of corn. Here are a few pics of just shelling off a wagon. It is set at the corn crib now. Tom
cvphoto85543.jpg


cvphoto85544.jpg
 
I was curious how the repair went,that was my job as a kid, to haul the cobs to the field, especially on the alkalie spots!
 
(quoted from post at 05:43:54 04/19/21) We finally got the 71 back together after fixing a bad shaker drive and replacing 4 bearings. Shelled about 800 bu so far and hope to finish the crib today. Goes slow working alone as I have to stop and empty the cobs out of the manure spreader twice for every load of corn. Here are a few pics of just shelling off a wagon. It is set at the corn crib now. Tom
<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto85543.jpg>

<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto85544.jpg>[/quot

In your other post I was going to ask you what brand of sheller you have but this one answered my question. I never did work behind a Deere sheller very often. The neighbor had a guy come with a truck mounted Deere but the rest MM. We hauled the cobs to the cattle yard to give the cattle a dry place to lay. That pile was hauled out and spread on the oat stubble in August. Dad had a Caswell loader on a Deere A to load the two spreaders. My sis drove the 630 Deere pulling a Deere L spreader if I remember right and I drove the 35 A pulling a Deere N spreader.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top