Lanz Bulldog

I don't understand how it can be considered running at zero RPM.

I've seen a lot of startup videos that ended with zero RPM and a lot of cussing! LOL
 
(quoted from post at 16:31:53 01/25/21) I don't understand how it can be considered running at zero RPM.

I've seen a lot of startup videos that ended with zero RPM and a lot of cussing! LOL

Steve, the way I understand it is that though it turns, and certainly at a rotational speed of over one RPM, it can run so that it reverses, reverses, reverses, and never makes a revolution thus 0 RPMs
 
There's a good article in the latest issue of Green Magazine about Lanz tractors. The early Bulldogs did not have a reverse gear and the operator was advised to reverse the engine rotation to back up.
 
> I don't understand how it can be considered running at zero RPM.

The video explains it pretty good. At idle, the single piston never crosses top-dead center, but bounces back down, turning the crankshaft in the opposite direction each partial revolution. So the total net RPMs are zero. Of course, the angular velocity of the crankshaft is never zero except when it reverses, but the crankshaft never completes a full revolution.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top