Loader goes up before going down, goes down before going

Roger in Iowa

Well-known Member
Finally found up what was wrong with loader when feathering to go up or down, the loader would go the opposite direction for a bit. Thought it was the valve on the loader. Replacing the valve did not solve the problem. Had tractor, 4020 Jd, hydraulics checked by dealer. Was okay. The loader would function normally when moving the valve fully, not feathering. GB loader.

Problem was with the loader cylinders. One of the cylinders internal seal on piston was failed, but not enough to render loader unuseable, but not with full power. Both cylinders were replaced as could not obtain original spec cylinder.

Don't know how to understand or explain hydraulically how it worked as it did.
 
I replaced this cylinder and left it opened and it rusted

Look at
cvphoto134189.jpg

The machine groves inside the cylinder.
Next cylinder I rebuilt I'll run a camera inside.

I can't find a engine cylinder hone small enough for my cylinders so I bought flap Sanders and extensions to get all the way inside the cylinder.

I don't know is you can see, my flap Sanders range from 60g to 320g.

I bought sanders and extensions from Amazon.
Anything has to be better than nothing.


cvphoto134190.jpg

I may someday see if I can remove the machine groves from this cylinder.
 
One hyd hose supplies hydraulic pressure to two hoses, one for each cylinder. No way there is an imbalance in pressure in the two cylinders..
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top