Parts for New Idea 12A Spreader

[Andreael]

I am in need of some help finding parts.
Complete Drive Arm Assembly with Sprocket Part# A375 SA1
Auxiliary Drive Rod, 1/2 Rod Part# 1240 S

Thanks

 

[Andreael]

Thanks to your help I have found most of the parts.

What I am now missing is the: Bolt, Carriage, 3/8 x 4 with lock washer for the A 375 SA1 drive arm.

Bolt has a long shoulder and short thread. Very specific to drive arm.

Thanks again.

 

[Jim.ME]

(quoted from post at 12:28:39 10/04/23) Thanks to your help I have found most of the parts.

What I am now missing is the: Bolt, Carriage, 3/8 x 4 with lock washer for the A 375 SA1 drive arm.

<img src=https://www.yesterdaystractors.com/cvphotos/cvphoto164196.jpg>

Bolt has a long shoulder and short thread. Very specific to drive arm.

Thanks again.

You should be able to get a carriage bolt like that at a good hardware store or a bolt supply house. They are not all fully threaded, as you find in some places.

 

[Andreael]

Thanks, Jim, I've tried for 2 days to find one online or locally. Closest I've found is England.

 

[Traditional Farmer]

Buy a longer bolt and cut off some of the threads?

 

[caterpillar guy]

A standard carriage bolt size and style.

 

[Jim.ME]

See if you can find a long (like 12'') 3/8 carriage bolt, only threaded 6" or so. Cut it off to length and thread it as needed.

Have you checked with an AGCO dealer? (New Idea is an AGCO brand). They might surprise you and be able to get one.

This post was edited by Jim.ME on 10/04/2023 at 06:24 pm.