Recent content by garymck

  1. G

    Ammeter Guage

    My parts book says that for the Perkins gas and diesel engines, the part is 528418M91 . But for the Continental engine, it is 504677M91
  2. G

    Issue with MF 35 backfiring

    My MF 135 was backfiring when I throttled down and someone on this forum told me to check the gasket between the exhaust manifold and the exhaust pipe. I thought this strange but after replacing the gasket and tightening the bolts, the backfire stopped.
  3. G

    3 pt lift

    On my 1972 MF 135, the lift doesn't work. The tractor only has 850 hours on it. I have had no problem until I started it today to cut grass and the lift doesn't work. Any ideas?
  4. G

    3 pt lift

    I tried several times today and no lifting. I left the tractor in the shed and tried again this afternoon and lo and behold, the lift worked. ???
  5. G

    What is this part/component underneath the fuel tank/eng

    That is what it is. The neutral safety switch, part 181 140 M91.
  6. G

    Mf 135 hitch

    Toronto, Ontario
  7. G

    Mf 135 hitch

    I have the same hitch on both my TO35 and MF35.
  8. G

    MF 135 backfire upddate

    I mentioned that my MF 135 often backfired when throttling down quickly from a higher rpm. Many gave suggestions but I want to thank Frankmn who suggested it may be a problem in the exhaust system. I replaced the gasket between the exhaust manifold and the exhaust pipe and I have used the...
  9. G

    MF 135 backfire

    On my MF 135 Perkins gas engine, the engine backfires, not on increasing the throttle or running the engine, but if I rapidly throttle down. If I slowly throttle down, seldom do I get a backfire. I have adjusted the carburetor from 1-3/4 to 2-1/4 as per the manual but there is no change. The...
  10. G

    MF 135 backfire

    I remember last year that I replaced the gasket between the exhaust manifold and the exhaust pipe leading to the muffler. I recently retightened the 3 bolts connecting them. I haven't operated the tractor much since the tightening procedure so you may have highlighted the problem. I will run the...
  11. G

    timing location

    I better try on a better pair of glasses since I can't find the timing marks on my pulley.
  12. G

    timing location

    OK. I am lost. Where are the timing marks for a Perkins 3 cylinder gas engine on a MF 135?
  13. G

    MF135 3pt hitch

    My manual says the O rings are 3/8 in. I.D. x 1/16 in.
  14. G

    MF135 Year ID

    Your tractor is a 1965 model.
  15. G

    1962 MF35

    I don't know where you are but in Ontario, one like that, if in good condition, would run in the $3-4,000 range. My neighbour sold his 1958 MF 35 (diesel) several years ago for $6,300, an usually high price. I have 2 similar machines, and I expect they are worth around $3,500 each (Cnd.)

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top