(800) 853-2651
SHOP NOW

Search results

  1. R

    Update on JD Z737

    Thanks for all the replies. I figured I'd start with the easy, changed the fuel filter and plugs. In changing the plugs, I realized a rodent was trying to build a nest . SOB chewed through one plug wire. I ordered 2 new coils and put them in last night, running much better. After the rain stops...
  2. R

    JD Z737 Run 'er til she dies

    I could use a little help troubleshooting my ZTR. I started it on Sunday and it sounded off. I first thought the exhaust manifold gasket was leaking. It seems fine. I then let run a couple minutes like normal before moving/ engaging the PTO. That almost killed the engine. I checked the fuel...
  3. R

    CIH 4240 Hydraulics Problem again

    I posted a few days ago about some problems I was having after changing the fluids. All is well and working but I was about 2 gals. short of full. My nearest CNH dealer is 35 miles away and I can't drive that far. So I called the dealer I had used in the past that services our area once a...
  4. R

    CIH 4240 Hydraulics Problem

    I am having issues with my hydraulic system? I changed the fluids with Hy-tran but am 1 to 2 gallons short of being to the top of the dipstick. At most/least I am at 80%. I cracked the power steering nut like my OP manual says and cranked it over with the fuel stop pulled. I had some fluid come...
  5. R

    CIH 4240 Hydraulics Problem

    Update, Thank you JimB2. I loosened the PS nut again and started the tractor. After a couple cycles on the steering wheel and 3 pt., it released and everything started working. Thanks again. Jeff
  6. R

    Fuel Tank Leak

    I have a problem and need help/options. I have a CIH 4240 open station diesel. My saddle tank has a pin hole, maybe 1/16. I was having issues with rust inside the tank. I replaced the filters a couple times and used a magnet to try and clean out the inside. I removed the tank and the paint...
  7. R

    Electrical question

    Use the brand E-Mon D-Mon. They come in single and three phase models. Work great and have power usage read-outs. We've installed a dozen of them in an old plant, got them through Cooper Ele. supply. Jeff
  8. R

    plumbing question?

    Update on the issues. 1st , he tried it in series, then in parallel but not with equal piping. He then researched more and re-piped too equal both tanks. When it still didn't work, he got in touch with me. I went over Saturday and found the upper element was bad. Changed it and all is well...
  9. R

    plumbing question?

    I work with his wife, She says that with the temps all set the same, one will heat but the other will not? I do electrical but told her I would ask here and come over and check wiring? I'll let you know what I find.
  10. R

    plumbing question?

    I have a friend who thought it was better to add a second 50 gal. electric hot water heater rather than replace the first 50 gal. with a much larger unit. He read on the web. and plumbed it but can't get them to work together? We get many electrical questions here but I see few about plumbing...
  11. R

    Disc size

    I was able to measure the old disc today, fronts are 17-1/4 to 17-1/2 with about 4-1/2" to frame rail. the scrappers are angled more to the axle/center. The rears are 16 to 16-1/2 with about 5-1/4" to the frame. I broke an axle a couple years ago, if I remember correctly, it was a 1-1/8" square...
  12. R

    Disc size

    I bought it used about 15 yrs. ago, was told that it was a Bush Hog brand. Fronts are ~ 16/16.5 rears less with alot of room to the frame. I will try to get better measurements today. Would there be an advantage to having straight disc on the back axle? Thanks Jeff
  13. R

    Disc size

    How do you know what the original size of a disc was? I would like to replace my rear sections to as large as what they were?
  14. R

    Finding a value

    At 25 yrs. old , if I remember right, the cub is just before the MTD takeover. With the blower,deck,weights,chains,new battery and rear ag tires,some extra parts and manuals , I may ask$650? Thats with hopes of getting 550-600. By the way, The green machine has approx. 1100 hrs. on it with no...
  15. R

    cub cadet 2160

    I tried craigslist but no comparison locally in SE Pa. Tractorhouse had 2 but that is dealer price. Mine has snowblower attachment with weights, new ag tires, new battery ,extra parts and the manuals.
  16. R

    Finding a value

    I have posted in the past about my cub cadet 2160. I have now decided to sell it but have no idea what to ask? I realize how location and condition make a difference, just want a starting point. Thanks for any input. Jeff
  17. R

    cub cadet 2160

    I posted a message on the garden tractor forum but that doesn"t get as much views. I am looking to sell my cub cadet 2160 and have no idea of a price to put on it? I tried looking at flea bay but the only thing close was a 2165 with snow plow for $900.I think that one will sit for awhile.I would...
  18. R

    Wheel hub dust caps

    I tried tapping with a dead-blow,no luck. I was afraid channel locks would crush them. They have been on about 18 yrs. without ever being removed.I'll try to use the channels carefully. Thank you
  19. R

    Wheel hub dust caps

    Maybe a simple/stupid question but how do you remove the caps without damaging them? I need to put new tires on my splitter therefore I need to get the wheels off. Thanks Jeff
  20. R

    Broadleaf herbicide spray rate question

    The rates seem to have a wide range, I went with the middle, 3.5oz/gal.Of course I figured the rain would stay up at the Pocono race but 6 hrs. after spraying, we had a brief shower.We'll see what happens in a week or two. I do remember adding 2-4D when I mixed 25 gal.in the ATV sprayer.I didn't...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top