replacement clutch TO35 correct or wrong parts?

[joekubota]

I don't suppose the red pressure plate and clutch will replace my original black ones... Seems like the red is on newer TO35. Any info, confirmation or correction appreciated.

 

[John Deere D]

I don't suppose the red pressure plate and clutch will replace my original black ones... Seems like the red is on newer TO35. Any info, confirmation or correction appreciated.

I do not know who supplied you the NEW clutch assembly....

However....this is the info on your new Clutch assembly as per "YT" parts Info:

This part is for a late production T035 (Serial number 177537 and above). This unit will not fit early production TO35 with stamped finger clutch.

Above info from "YT" Tractor parts...
As a side note:

I have NO financial and or vested interest as in personal gain through ownership of "YT"

 

[John Deere D]

I don't suppose the red pressure plate and clutch will replace my original black ones... Seems like the red is on newer TO35. Any info, confirmation or correction appreciated.

Info as per "YT" tractor parts:

Clutch Kit, Remanufactured, 516068M93 - For Massey Ferguson tractor models F40, TO30 (S/N 177395-177519 and S/N 177538-later), TO35 (S/N 177395-177519 and S/N 177538-later), 35 (S/N 245087-later), 50, 65, 135, 150, 2135, Compatible with Massey Ferguson Construction and industrial models 20 (IND S/N DC2061-later), 202, 203, 302, 304, Replaces Massey Ferguson OEM number 516068M93, 526665M91, Clutch Diameter - 11", Clutch Hub Diameter - 1-1/8", Clutch Splines - 10, Clutch Center - Solid Offset, Clutch Type - Woven, Pressure Plate Size - 11", Pressure Plate Levers - 3, Pressure Plate Springs - 9, Pressure Plate Hub Diameter - 1-3/4", Pressure Plate Splines - 10, For a New version of this sku use Item #: 122859, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202053) $410.01

 

[joekubota]

I do not know who supplied you the NEW clutch assembly....

However....this is the info on your new Clutch assembly as per "YT" parts Info:

This part is for a late production T035 (Serial number 177537 and above). This unit will not fit early production TO35 with stamped finger clutch.

Above info from "YT" Tractor parts...

thank you for your response... I appreciate it and it will make my life much easier if the supplier insists they sent correct part. As a point of information, since I have the IT shop manual, I was aware of the different clutches and sent a photo of my pressure plate etc to supplier before ordering... I will update YT - hopefully with the good news that the supplier accepts responsibility etc... (I also supplied TO35 serial number). In any event, thank you. joe