1965 1950 FWA

KLW

New User
Will the front wheel drive axle and transfer case fit on a 2255 or is that a completely different setup?
 
I would like to convert. I have the output shaft on the transmission that is correct to accept the transfer case.
 
Your best bet is to go to Agcopartsbook and look at each tractor yourself. I'm pretty sure that a lot of the parts interchange, but you would need the right ratio to match your tire size.
 
I would first make sure you have the correct output shaft for a 2255. We lost one where a tooth was broken out and we could not find a replacement. Something about the output shaft on the 2255 being different that the other models.
 
The ratio in the front axle will be wrong, the mounting craddle is also a lot different on the 2255.
I have a couple complete frontends for 2255. 715-579-4739
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top