Heeston 1014 Bearing

[molinegb]

Have a 74 Hesston 1014. Bearing went on reel pulley drive end. Odd bearing 1 1/2 ID and 2.83 O D or 38.1 x 72 mm. Original bearing is a Vanguard 207R. Any ideas where to find one?

 

[Jim.ME]

Search 207R Bearing. Many hits a bearing supply house should be able to get them. Some on eBay and Amazon

 

[molinegb]

Tried and all lead to wrong od. Found another number on a bearing Roberts SLF 24L.

 

[rrlund]

Have you tried an Agco dealer?

 

[molinegb]

Have you tried an Agco dealer?

Agco parts books don't show my serial #.

 

[Brendon-KS]

Being a 74 model yours must be a side-pivot, correct? I'm seeing that the Roberts SLF24L bearing is used on the left end and is 1-1/4" OD. But, the bearing behind the belt drive is shown as 1-3/4" OD. So, I'm not sure what you've got. What is the serial number of your machine?

 

[molinegb]

Being a 74 model yours must be a side-pivot, correct? I'm seeing that the Roberts SLF24L bearing is used on the left end and is 1-1/4" OD. But, the bearing behind the belt drive is shown as 1-3/4" OD. So, I'm not sure what you've got. What is the serial number of your machine?

Center pivot. 1 1/2 ID (38.1MM) OD 72MM serial 4 digit 41 something.

 

[Brendon-KS]

OK, that makes sense. AGCO part number is 713198 and the print lists Fafnir RA108RRB-3, BCA NPS107RP2NC, and Roberts SLF-24L as supplier part numbers. Being that the print is nearing 60 years old I'm sure there are other cross-references to these that would work just as well.