Parts needed for John Deere B

[drastic dave]

Bought a 40’s styled B. There was no lower washer to support the filter. What parts are needed to get it back where the filter will work?

 

[JIM MN]

The Large bottom washer is AA2096R. But what else are you missing of other parts? Eight metal parts make up the bottom cover? Plus the large square rubber gasket, A519R.

 

[UnstyledB]

I s

Bought a 40’s styled B. There was no lower washer to support the filter. What parts are needed to get it back where the filter will work?

I suspect your B is set up to use the brass purolator reusable oil filter. Unless you have the original brass cartridge you will want to convert over to use a disposable paper element. You will need parts 7 through 17 (less number 15) from these diagrams.

 

[UnstyledB]

You can usually find a complete cover set up as you need it on ebay. You will also need to find part # 7 which can typically be found on ebay.

 

[UnstyledB]

Now that I think about it you will also need to replace the center stud with a shorter one (8 7/8") vs the 10" one it has now.