Not db4600
Member
These are borrowed from the world wide web.
Those tile silos are very close in size to the one which was here. They are held together by steel bands hidden in voids in the tiles. I'd like to know what holds the brick silos together?These are borrowed from the world wide web.View attachment 165902View attachment 165903View attachment 165904
Me too. If you find an answer i'd like to hear it.Those tile silos are very close in size to the one which was here. They are held together by steel bands hidden in voids in the tiles. I'd like to know what holds the brick silos together?
Some courses are running bond but some look like flemish which will tie into at least 1 inner course. You're likely right.I’d venture a guess that the brick silos are 3 or 4 rows of brick thick, with each row interconnecting
I demolished a silo foundation once that had a ring of used horseshoes all the way around for reenforcing. I worked on another old building with thick concrete walls where new openings had to be cut, there was all kinds of old steel in those walls, some 1"X2" strap.Those tile silos are very close in size to the one which was here. They are held together by steel bands hidden in voids in the tiles. I'd like to know what holds the brick silos together?
On the outside of my basement wall a small piece of concrete popped off. A mower sickle is visible...basement was poured in 1955.I demolished a silo foundation once that had a ring of used horseshoes all the way around for reenforcing. I worked on another old building with thick concrete walls where new openings had to be cut, there was all kinds of old steel in those walls, some 1"X2" strap.
All neat. I especially like the first pic.These are borrowed from the world wide web.View attachment 165902View attachment 165903View attachment 165904
Me too.All neat. I especially like the first pic.
I had a 16'x40' brick silo ,one layer of 4"x 8" bricks with waffle steel in mortar about every 2' and a few strap bands on lower half .Had 3/4"rods across doors to climband 2x12" toung and grouve door boards. No ladder on outside, it had a 3x12" plank to climb across to filler window for pulling up filler pipe . Was mortered in inside and a 5' pit .Those tile silos are very close in size to the one which was here. They are held together by steel bands hidden in voids in the tiles. I'd like to know what holds the brick silos together?
Beautiful and interesting silos. Thank you for posting.Think something like that could be built these days. No one left with the knowledge to build it.
Beautiful and interesting silos. Thank you for posting.These are borrowed from the world wide web.View attachment 165902View attachment 165903View attachment 165904
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy