Wagner Loader Special Bolt

[vtfast]

Looking for the special bolt that holds the pully onto my crankshaft on my 8N, anybody know an alternate part number or bolt to use?
Wagner part number: 100-281FA, Special Bolt.

 

[old]

Looking for the special bolt that holds the pully onto my crankshaft on my 8N, anybody know an alternate part number or bolt to use?
Wagner part number: 100-281FA, Special Bolt.

Have you checked this site?? They may have it or a New Holland deal may be able to get one for you

 

[vtfast]

Yes, I did. The part number in the books shows this and with not knowing a proper cross cross-reference, a little hard to know what I am in need of. I don’ t know of and have not found a cross reference for parts.

 

[old]

Yes, I did. The part number in the books shows this and with not knowing a proper cross cross-reference, a little hard to know what I am in need of. I don’ t know of and have not found a cross reference for parts.

By the way is this the bolt that holds the pulley to the crankshaft or the bolts used to hold the hub for the hyd pump drive??

 

[vtfast]

It is the bolt that holds pulley to crankshaft.

My thought is to check the original up and turn the end off if need be for clearance if it comes down to that.

 

[old]

It is the bolt that holds pulley to crankshaft.

My thought is to check the original up and turn the end off if need be for clearance if it comes down to that.

I'd ask this down in the 9N/2N/8N forum

 

[vtfast]

Will do, thanks.