Woods belly mount mower??

[atlarge54]

A few years ago I broke a spindle on my L306 (on Allis) and for repairs I just purchased another complete deck. At the time I purchased it I was told it fits a 600 series Ford tractor. Today I started cleaning up some of my leftover "junk" to make some space and find the mount is L306-MF ser. #1718. On eBay it shows a manual for Massey Ferguson. When I look for parts on German-Bliss it shows some of the heavier parts are "no longer available". The drive pulley alone is over $400 yikes? So, is a Ford 600 similar to a Massey Ferguson? Any tips on where or how to unload this, approx value.

 

[Fixingfarmer]

It’s worth about what the pulley is worth

The rest if you find someone who can use it 50 bucks without the deck it’s not worth much

My 306l that was on the John Deere b for awhile did not come with a pulley and I gave about that price for the whole mower and just built a pulley using a pto extension so that I could still use the pto while it was bolted on

 

[Bob Bancroft]

A few years ago I broke a spindle on my L306 (on Allis) and for repairs I just purchased another complete deck. At the time I purchased it I was told it fits a 600 series Ford tractor. Today I started cleaning up some of my leftover "junk" to make some space and find the mount is L306-MF ser. #1718. On eBay it shows a manual for Massey Ferguson. When I look for parts on German-Bliss it shows some of the heavier parts are "no longer available". The drive pulley alone is over $400 yikes? So, is a Ford 600 similar to a Massey Ferguson? Any tips on where or how to unload this, approx value.View attachment 169275

Those expensive parts are so tractor specific, good luck ever finding someone who needs them. I gave up and took mine to an auction.

 

[1948CaseVAI]

if it's too expensive or impractical for you to repair, why in the world would you want to push it off on someone else who may not have as much information as you? That's extremely sketchy.

 

[atlarge54]

if it's too expensive or impractical for you to repair, why in the world would you want to push it off on someone else who may not have as much information as you? That's extremely sketchy.

I don't plan to use a handgun while selling.

 

[moresmoke]

if it's too expensive or impractical for you to repair, why in the world would you want to push it off on someone else who may not have as much information as you? That's extremely sketchy.

OP didn’t say anything about impractical to repair. He said he bought a parts machine and is looking to sell off some of the parts he has no use for.

To the original question, that mounting plate with the diamond hole fits over the pto, a likely will fit any tractor of the Ford/Fergie lineage. Overall, I’m sure there is someone out there that wants them, but how do you find that person.

I’d stick a post on marketplace and give it a couple months.

 

[Fixingfarmer]

I’d probably auction it as a set of what’s left someone will buy it for the pulley or some other part they need

For sure someone would bite on the pulley it wouldn’t no sale and it’s not like someone couldn’t find some value in it I bet it brings over 100 bucks and then it’s gone

 

[mdm1]

The man just has something that he thinks maybe someone else could use! My Goodness!!!!

 

[MM-TX]

Put it on marketplace for a while to see if someone local wants it all. If no bites you can put the pulley on eBay for a good price and ship it. Same with the other parts of it small enough you can ship. That way the parts get used. I guess for auction if you put it on a pallet and get it to an auction house you’ll get what you get. I’m cleaning up and if I put random parts on marketplace it usually takes a while especially if I want too much.