641 with Sherman backhoe. Can the 3pt be locked out?

tractorguy2

Well-known Member
I have a Ford 641 that when new the dealer installed a Sherman backhoe and sold it to a cemetery. I want to remove and sell the Sherman and replace it with a 3pt. Tractor has the rockshaft covered with two sleeves so it can't rotate. The 3pt lever is in the raised position and doesn't move. Is it possible the dealer did something inside the top cover to "lock" the lever?

The blade on front is operated off the normal engine hydraulic pump. The backhoe runs off the PTO pump.
 

Attachments

  • IMG_3051.JPG
    IMG_3051.JPG
    71.3 KB · Views: 0
  • IMG_3053.JPG
    IMG_3053.JPG
    71.9 KB · Views: 0
  • IMG_3111.JPG
    IMG_3111.JPG
    69.1 KB · Views: 0
Can you get a closer picture of that block or whatever is under the seat that has the hydraulic hoses connected to it?
 
I have a Ford 641 that when new the dealer installed a Sherman backhoe and sold it to a cemetery. I want to remove and sell the Sherman and replace it with a 3pt. Tractor has the rockshaft covered with two sleeves so it can't rotate. The 3pt lever is in the raised position and doesn't move. Is it possible the dealer did something inside the top cover to "lock" the lever?

The blade on front is operated off the normal engine hydraulic pump. The backhoe runs off the PTO pump.
My lever wouldn't move either after being installed on a backhoe tractor either (840 tractor and 713 backhoe). The shaft was stuck where it goes through the shaft tube piece, probably from non-use. It was not just a little stuck, it took a lot of work to free it up.
 
It may be easier to find and buy a similar tractor with the conventional three point hitch and sell the 641 with the backhoe attached and functioning. You might even come out money ahead selling the backhoe tractor and buying an ag version. You also would not have the hassle of removing the backhoe and trying to sell it. You may also find yourself rounding up potential missing items to make a three point system functional.
 
My lever wouldn't move either after being installed on a backhoe tractor either (840 tractor and 713 backhoe). The shaft was stuck where it goes through the shaft tube piece, probably from non-use. It was not just a little stuck, it took a lot of work to free it up.
That thought crossed my mind it could be rusted up inside the tube.
 
It may be easier to find and buy a similar tractor with the conventional three point hitch and sell the 641 with the backhoe attached and functioning. You might even come out money ahead selling the backhoe tractor and buying an ag version. You also would not have the hassle of removing the backhoe and trying to sell it. You may also find yourself rounding up potential missing items to make a three point system functional.
Ford tractors are not easy to find in my area. Hundred series and 01 series rarely come up for sale. Live auctions are gone. Has not been one in five years. My dad has already reworked the engine and rear axle bearings and brakes. I have been buying 3pt parts I don't have off ebay all summer. Upper lift arms $50, sway bar brackets $8, drawbar bracket $10, top rocker $8, both running boards $20. I only lack the left lift rod. I'm not taking the backhoe off till next spring. I plan on advertising it for a short time on Face Book market place and Ford tractor groups. If no interest it will go on Auction Time. I have already discussed selling it with my Auction Time agent. He thinks we can sell it without the tractor. I plan on keeping the Dearborn blade.
 
After reworking the hydraulics on my 641 including full disassembly to replace a worn off pivot pin at 49 years old. I can say with absolute certainty that I hope everything but the seals last at least 50 years so it won’t be my problem again, since I won’t remember how to do it next time. Splitting it apart at the transmission would probably be a much easier job if you can find a rear 1/3 donor at a good price. I know it’s not what you asked, just an idea.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top