770 power traction hitch

[Superpicker]

Looking at a late 770 and it has what was described as a power traction hitch. Right now I have only seen it by pictures, not in person yet. Is this hitch considered a 3 point hitch and can be used as such.? Or is like IH's fast hitch and only adaptable to Oliver's specially adapted implements like a plow?
Also, was wondering about the pto lever. Evidently it must be different than the regular factory one with the knob on top. This looks like a home fabbed one. Anyone got a picture of the factory one? The fastening links with the attaching balls for the 3 point arms are not attached. They must be detachable? No top link on it either, someone must have taken it off.
Thanks

 

[Ken Loewenhagen]

It can be used as a three point if you have all the parts. It can be used with any three point equip. The PTO lever is totally different. I will be going out to the shed later. I'll get you some pictures.

 

[Ken Loewenhagen]

 

[Ken Loewenhagen]

 

[Ken Loewenhagen]

 

[Superpicker]

Thanks Ken!

 

[Saskoliver]

It can be used as a three point if you have all the parts. It can be used with any three point equip. The PTO lever is totally different. I will be going out to the shed later. I'll get you some pictures.

Hi Ken;
I have the Hydra Hitch which was missing the PTO Lever. I have since found everything except the Cast Steel Arm (PN 100800A) that attaches to the PTO Clutch Release Shaft. Any Chance, You can get Me the Pivot Center to Center Dimension? Thanks.

 

[GermantownGreen]

Hi Ken;
I have the Hydra Hitch which was missing the PTO Lever. I have since found everything except the Cast Steel Arm (PN 100800A) that attaches to the PTO Clutch Release Shaft. Any Chance, You can get Me the Pivot Center to Center Dimension? Thanks.

We'll try to help you too.
We have both, power booster, and a 880 diesel with the hydra hitch.
GG Wes

Cool 1' and blustery, West Central Missouri.

 

[Saskoliver]

We'll try to help you too.
We have both, power booster, and a 880 diesel with the hydra hitch.
GG Wes

Cool 1' and blustery, West Central Missouri.

Thank You!
Currently -34C (-30F) here in Saskatoon Saskatchewan. Up until the New Year We were Predominantly above Freezing with no Snow!

 

[KL in Wi]

Hi Ken;
I have the Hydra Hitch which was missing the PTO Lever. I have since found everything except the Cast Steel Arm (PN 100800A) that attaches to the PTO Clutch Release Shaft. Any Chance, You can get Me the Pivot Center to Center Dimension? Thanks.

I have 2-5/8". Sorry it took so long. Didn't see your message until this morning

 

[KL in Wi]

I have 2-5/8". Sorry it took so long. Didn't see your message until this morning

I have 2-3/4". Sorry it took so long. Didn't see your message until this morning

 

[KL in Wi]

Don't go by the 2-5/8" it's actually 2-3/4"

 

[Saskoliver]

Awesome. Thank you so much!
With the Dimension and the good Picture, I can Fashion a Copy as i Work at a Machine Shop.

77 will be on mower Duty come Spring.

 

[KL in Wi]

Your welcome