(800) 853-2651
SHOP NOW

Recent content by 52geemsee

Yesterday's Tractor Forums
  1. 5

    PTO won t stay engaged

    I agree. Going to order complete new assembly and not to worry about. Thanks to all.
  2. 5

    PTO won t stay engaged

    Just so I m clear the retainer has a snap ring on the shaft next to the bearing to keep it from moving? The snap rings that hold the bearing in the housing seem to be in place. Looks like the retainer is the only thing moving on the shaft.
  3. 5

    PTO won t stay engaged

    Pulled the pto shaft and the only thing I could find wrong was the bearing retainer was about 1/2" from being seated against the bearing. Everything else appears to be fine. Used a brass punch and drove the retainer against the bearing. Seemed like a nice tight fit. I wondering if it was...
  4. 5

    PTO won t stay engaged

    1963 4000 4 cylinder gas 5 speed trans PTO. Will not stay engaged. Tractor is new to me and today while using bush hog any time the mower hit a tough spot PTO would disengage. I was a long way from the house so I used a tarp strap to keep the PTO lever in the engages position. I know, not a...
  5. 5

    2019.05.14 "Extra" Pic

    2 pickups, 1 Suburban and 1 panel truck.
  6. 5

    Grandson worked his first field!

    You should be very proud of your grandson.
  7. 5

    4000

    Thanks to all for the information. I m sure more questions to come.
  8. 5

    4000

    Haven t got a manual yet but want to put tractor to work. I see there are 3 reservoir lids for the transmission, the hydraulic lift area and the rear axle. What type of fluid is used in each one? Hydraulic reservoir has a dipstick but how do you check levels in the transmission and rear...
  9. 5

    640 Ford sold at auction

    No buyers premium. Only seller pays commission. Located in central Kansas. Radius rod patched and welded. Strong but ugly. Air cleaner bottom is correct metal cup. Skinny 8N front wheels with new tires. Rear tires are in very good condition. Front headlights off a Case 430. Fuel...
  10. 5

    640 Ford sold at auction

    None the less I think it was a price for the tractor
  11. 5

    640 Ford sold at auction

    1956 Ford 640, mechanically sound with Sherman combo trans sold Saturday for $1850.
  12. 5

    Why Buy An N

    I bought my 640 about 18 months ago for $500. Seller didn’t realize it had a Sherman over and under tranny in it. I did have to put a clutch in it and rebuild the lift cylinder but still a great bargain and much more tractor than my 8N.
  13. 5

    8n gas tank removal

    I just replaced my fuel tank. Was a little tough with the FEL on the tractor, but doable. While I had the hood off I decided might as well split it and take care of that sticky clutch.. 4 hours to spilt, replace clutch and related components and put back together. 3 hours to put the...
  14. 5

    Rear wheel weights on a 48 8N

    I think I will go ahead and mount the weights on the outside of the wheel. Looks to me the bolts should be 5/8" X 8". Can anyone verify that? I will probably have to order bolts and hope to get the correct ones first time. LOL Thanks for your help.
  15. 5

    Rear wheel weights on a 48 8N

    I want to put the weights pictured on my 8N. I know I can put them on the outside of the rim but I am wondering I'd if could put them on the inside of the rim? Photos of weights and my current wheel/rim setup, inside and outside. Also, can someone tell what length bolts I will need to...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top