Recent content by 6BuchTractorRed

  1. 6

    52 JD G

    May try that if the hydraulic doesn't work.
  2. 6

    52 JD G

    Tried all those things. Loosen the wheel bolts to the hub incase there was any play in the bolt holes. Will keep trying.
  3. 6

    52 JD G

    How do you free the rear wheels that are frozen to the axles. Have removed the locking hub, loosened the wheel bolts, used penetration oil, secured a heavy plate with bolts to axle hub and placed a 20 ton jack between plate and axle stub but can't get it to move. Any suggestions.
  4. 6

    Voltage to magneto

    I put an alternator on my H Farmall that has a magneto and can only get voltage at the resistor but when I connect the wire to the magneto I lose the voltage.
  5. 6

    Electric clutch sensor

    Case 5130 Maxumm's clutch disengage light comes on so tractor won't move. Dealer has replaced all three sensors but problem continues. Tractor works until at some point you push in the clutch and the sensor light comes on. Ron
  6. 6

    666not running properly

    I replaced the exhaust manifold.
  7. 6

    666not running properly

    It was missing before.
  8. 6

    666not running properly

    I did get movement both in and out and up and down. Do I need to replace the distributor?
  9. 6

    666not running properly

    I installed new rings, pistons and rod bearings in my IH 666 gas but can t get it to run smoothly, sounds like it has a race cam in it. Took it to a dealer and they tried and checked everything but couldn t get it to smooth out either. They overhauled the carb., adjusted the governor, replaced...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top