Recent content by aaronknodel

  1. A

    Case 930 Engine Knock and Failure

    Hello everyone, Over the winter I rebuilt the engine on a Case 930 round fender, new pistons and sleeves, main and rod bearings and had the heads decked and valves done, reassembled and it started and ran amazing, lots of power burnt no oil and I was happy, it did however have a mild knocking...
  2. A

    Hesston 5600 bottom belt roller bearing replacement

    Hi all, I am doing a bit of an overhaul on my hesston 5600 which has been great for me so far, the bottom belt had a big tear in it so decided to replace, once it was off I discovered the bale support roller closest to the pickup is locked up tight, this appears to be one of the rollers that...
  3. A

    Allis Chalmers D-17 Throttle/Governor

    Hi there, sorry for the hiatus, lots of things on the go, finally getting back to the Allis and I just need to clarify, when testing for backwards movement on the vertical arm, is this with the governor in place or not? when it is in place it now has no backwards movement, when not in place and...
  4. A

    Allis Chalmers D-17 Throttle/Governor

    Thanks for the quick response! So I can confirm that the governor assembly sliding sleeve is put in correctly. To your second point the vertical arm does move forward against spring pressure about and inch and spring back. To your third point, when I remove the carb link the vertical arm does...
  5. A

    Allis Chalmers D-17 Throttle/Governor

    Hi all, so after a governor weight came free and chewed up the timing gears I've got my D-17 back together and running, but the throttle is all out of whack. It idles way too fast almost close to wide open, and the throttle lever has only about half an inch of movement to wide open. It looks...
  6. A

    Case 1370 loose powershift shifter

    thanks for the responses everyone! I indeed was missing the detent ball and we actually found it in the corner of the shop! Power shift is working perfectly now! Thanks!
  7. A

    Case 1370 loose powershift shifter

    Hi all, I have a case 1370 that I've been working on lately, previous to the latest repair the powershift worked perfectly fine, I removed the powershift control valve assembly on the passenger side of the transmission (the repair had nothing to with the powershift I accidentally removed it...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top