(800) 853-2651
SHOP NOW

Recent content by AdamOH

Yesterday's Tractor Forums
  1. A

    Ford 758 Backhoe Parts

    Hey guys I am looking for some information on a Ford 757 or 758 backhoe. A little back story, the backhoe started out as an auction buy in a pile of parts, we have since reassembled it and converted it to 3 point mount. But we are missing a few parts and wanted to see if anyone happened to...
  2. A

    Dunham Lehr Loader Brackets - Massey Ferguson 180

    We bought a Dunham Lehr model 22 loader to put on our Massey 180 and got the mounting brackets but they came off a different model of tractor. I was wondering if anyone would have a Massey 165 or 180 with the same loader that would be able to post some pictures of the factory brackets. We will...
  3. A

    IH 460 Fast Hitch

    Thank you, Could you please go into a little further detail on how to readjust the hitch. The bosses, I'm not sure about.
  4. A

    IH 460 Fast Hitch

    I have a 59 Farmall 460, I have a question about the fast hitch. Can it be locked into one position so it cannot raise and lower. When running the haybine and I raise the cylinder to make a turn and set it back down the fast hitch sometimes will drop on its own and if I'm not watching will plow...
  5. A

    Farmall 460 Tuning

    I took a look at the exhaust manifold and it is missing the heat exchanger spring. If the damper isn't able to move when the engine warms up would this be the cause of the sputtering, as it seems to run better before it gets warmed up fully? Thanks
  6. A

    Farmall 460 Tuning

    The choke has little effect until about half half then it progressively gets worse the further the choke is out.
  7. A

    Farmall 460 Tuning

    I worked with it last night and have the main jet turned out 4 times from the seat and adjusted the idle mixture out 1 turn and is running much smoother under load now. But revs up to 2k rpm and is still under powered.
  8. A

    Farmall 460 Tuning

    I have a 59 Farmall 460 that runs great with no load on the engine. But once the engine starts getting loaded with the pto engaged it will start to supuder and die. if you clutch it soon enough the engine will speed back up only to do the same thing once the load is reengaged. Its got new plugs...
  9. A

    Storing Dry Corn in Silage Bag

    We are thinking about storing some extra dry corn this fall to feed our steers with. Our plan is to store the corn in a silage bag, how dry does the corn need to be going into the bag so it doesn’t mold. We were also tossing up the idea of rigging up a bin fan to the end of the bag to dry the...
  10. A

    Case 1816 Skid Loader

    I recently got a case 1816c skid loader with an Onan B43M engine. The guy I bought it off said it had been sitting outside for about a year since it had quite running, they thought it was only running on one cylinder then. I cleaned and corrected the points gap and got it started up, it was...
  11. A

    Cattle sorting ground feed

    How many gallons of the cle are you adding to a ton of feed in the mixer? Does the liquid supplement make the feed more difficult to unload or bridge in the mixer?
  12. A

    Cattle sorting ground feed

    Thanks I'll try to grind in a bale of hay to see if it helps hold the mix together. Have you ever had the hay bridge in the mixer?
  13. A

    Cattle sorting ground feed

    It's a old artsway grinder mixer and we add the pellets last through the supplement hopper. They only mix for maybe 5 mins just long enough to load them and drive to the hopper tank to start unloading. I was afraid that the liquid would stick to the sides of the mixer tub and may not flow...
  14. A

    Cattle sorting ground feed

    We grind our feed for our steers it"s mostly shelled corn and protein pellet, lately we have been having problems with the pellets breaking up and getting dusty in the mixer. I was thinking about adding a few gallons of liquid molasses to each batch to bind some of the dust together so the...
  15. A

    Massey 44 - Rough Shape Value

    I got a Massey Harris 44 in a combined deal with a Farmall 460. The 44 has been outside your quite a few years and motor is now locked tight and the left drive wheel the brake is locked up, I would guess the brake band has rusted to the drum. It has hydraulics but no power steering. The sheet...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top