Recent content by Andy P

  1. A

    4320 Hood

    Westlock Tractor Parts , Westlock Alberta Canada . They had one a few years ago and not to many 4320 around these parts. Google them and see.
  2. A

    570 Cockshutt Repower

    Some good info ,the 5.9 really is intriguing and they're are some available but the 354 was my first choice but now I'm thinking. Thanks...
  3. A

    570 Cockshutt Repower

    Have 570 with cracked block and was thinking of repowering with 354 Perkins or even gas engine . Any Ideas or suggestions would be appreciated. Tractor would be used on work such as grain auger and brush mowing and such.
  4. A

    massey head on ih

    Had for many years used a 9016 MF header on 715 IH, this is a rigid grain header with hydro pickup reel and also installed hydro pack to run reel variably. Still have adapter kit.
  5. A

    MF Flex header attachment

    In late 60's and 70's Massey straight header were equipped with flex table options and pickup reels. Was this Hart Carter stuff or? WE have a Claas straight header with the same setup but can't recall manufacture. Parts are available at Massey Dealer but parts people are to young and can't...
  6. A

    Swather

    I have an old 6450 Swather with 14ft hay header that I'm still using and have a 65DS 21ft double swath draper header that we no longer use. This header is in real good shape with UII universal pickup real and is shaft drive. Haven't used it in three year so canvases might need replacing ,one...
  7. A

    1600 MM 4wheeldrive

    swmolines you were on the mark, it was a stuck metering valve. I had another pump and opened it up to get oriented, went back to the old girl today and took cover off and the metering valve was really stuck, but moved it with small screwdriver a few time then it moved freely. Turned the key...
  8. A

    1600 MM 4wheeldrive

    Shutoff is mechanical with throttle lever, but will definitely check return line you mentioned.
  9. A

    1600 MM 4wheeldrive

    Parked the old girl last fall and went to start it the other day and it wouldn't go. Electric lift pump didn't work so replace it, bled lines to injection pump and it will not fire, not even smoke. Could there be something stuck in pump that will not let fuel to go. It has Rosa Master pump...
  10. A

    4440 thermostat question

    It was -40 only for one night a week ago -20-25 and down to that temp in a three day period, the last 5 days coming to +25 and +30 now. Week prior to Christmas and for about 10 days weather was -12 to -25 at night. Hear Florida got cool too.
  11. A

    4440 thermostat question

    In North Eastern Alberta we use 192 all the time in winter and even put heat houser on. Good to below 40 cows got to eat.
  12. A

    820 rear wheels

    I was told years ago that you could take the wheels and hubs off 105 JD combine and they would fit on the 80 820 830.
  13. A

    Crenlo cab on 820

    Need photos of brackets and under frame attaching Crenlo cab to 820 blackdash. This make and model of cab was apparently supplied by Deere in the day. Any pictures of these cabs on these tractors would be of interest. Thanks.
  14. A

    Crenlo cab on 820

    Bought a cab that came off an 820 rice tractor, this was a green dash very early model, even had small fenders like an 80. My question is will the cab fit properly on a black dash 820 with the large fenders and would anyone have pictures or diagrams of how it is fixed to the drawbar frame and...
  15. A

    JD 850 2 cyl prototype

    Was there ever such a tractor as 850 2cyl diesel prototype or is this an Eertl hoax? If true would be nice to see more info and photos. thank.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top