Recent content by Andyinchville1

  1. A

    ///// category 1 versus category 2 /////

    HI, My tractor is an international 384 ... I think it is about 40 HP ... I have not seen the backhoe unit so I don't know how the pins for mounting are attached .... interesting to know about possibly being able to simply change out the pins if bolted on ... alot easier than drilling out he...
  2. A

    ///// category 1 versus category 2 /////

    Hi I was looking to buy a self-contained backhoe for my tractor but unfortunately it seems to be a cat 2 unit and my international 384 has cat 1 holes on the lift arms ... It's only off by about an eighth of an inch or so or maybe a smidge more but is difficult to change over or is that not...
  3. A

    ///// international 384 tractor better to make the front end wider or the rear end narrower? /////

    HI All, Thanks for all the replies and help . I did get some measurements from the tractor ... at least the best that I could. The front Bucket is 55 1/2 wide The front track is about 59" wide so it appears the front wheels may actually stick a little outside the bucket currently The rear...
  4. A

    ///// international 384 tractor better to make the front end wider or the rear end narrower? /////

    Hi I recently bought an international 384 tractor with Kelley 600 loader. The front wheels are approximately the width of the front bucket but the rear wheels are somewhat further out (wider rear track than the front). Normally this would not be a problem but my trailer has two ramps and...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top