Recent content by Baumanm

  1. B

    2N with loose gear shift

    I have a 2N with a loose gear shift. I pulled the boot up and examined the pin for the shifter. The end I can see looks like the tip of a flathead screwdriver. Obviously that will get replaced. My two questions are; 1) Can I simply put the tranny in the neutral position and pull the shift lever...
  2. B

    8N Side-mount insulation points.

    When using a multi-tester to test the coil/points/general function of the distributor, what tests should I run and where do I put the leads.
  3. B

    8N Side-mount insulation points.

    Ill have to check the cables when I get a chance and recheck everything with a multi tester. Unfortunately the tractor is 90 miles from me. Going to have to convince the wife to let me put something else in the garage.
  4. B

    8N Side-mount insulation points.

    I used a bulb tester (didnt have a multimeter with me) to determine that with the key on I had power to the coil and from the coil to the points. I did unplug the coil wire at the cap and try to ground it to the bloc, but didnt get anything. With that being said I now remember that I tried...
  5. B

    8N Side-mount insulation points.

    Two questions: 1.) I have an 8N side-mount that I rebuilt recently. No spark beyond the cap. Points, cap, rotor, condenser and coil are all new. Ran the typical tests recommended here, but still cant get spark. On a suggestion from another site, I eliminated the post on the side of the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top