-
B
Jerky, chattering hydraulics John Deere 1630
Ive done some more inspecting on the 1630. The supply line to the loader is teed into what I believe is the pressure relief valve on right hand side of the transmission. The other half of the tee goes to the rear hydraulic directional control valve body. Also Ive looked into the transmission...- Betty2471
- Post #7
- Forum: John Deere
-
B
Jerky, chattering hydraulics John Deere 1630
Thankyou for the ideas. I will track down the supply line for the loader control valve. Also will check the movement of oil in the filler cap. Still trying to track down some gauges to test the stand by pressure and will also check pressure on the hydraulics at rear of tractor. Where would be...- Betty2471
- Post #6
- Forum: John Deere
-
B
Jerky, chattering hydraulics John Deere 1630
The hydraulic control is mounted on the loader arm. The return line goes back to the filter housing. No lines use the hydraulic blocks a back of the tractor. And as I said the 3 point hitch arms chatter when used also,but have a lot of power like the loader.- Betty2471
- Post #3
- Forum: John Deere
-
B
Jerky, chattering hydraulics John Deere 1630
I recently purchased a JD 1630 with 145 loader. Loader and 3 point hitch chatter when raising, but they have enough power to lift tractor. I have changed hydraulic fluid and filter, cleaned the sump screen and the screen on main pump, they were quite clean. I checked the valve above the filter...- Betty2471
- Thread
- Replies: 7
- Forum: John Deere
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy