Recent content by BGlynn

  1. B

    WD45 Hydraulic Pump

    I've adjusted the hydraulic pump on my 1952 WD45 every way possible using the Screw A, Screw B, Screw D, etc. diagrams and recommendations but I still cannot get my brush hog where I want it. My hydraulic control lever has my implements too low at the bottom position, but if I don't use a vise...
  2. B

    WD45 Hydraulic Setting

    Very helpful. Thanks much.
  3. B

    WD45 Hydraulic Setting

    I'm new to my 1953 WD45 after many years on an 8N. When having a three point implement on such as a brush hog, the mower doesn't stay down even with the control in the lowest position. I looked at the manual on how to control that but I'm still confused. I see the A-B-C thumb screws in the...
  4. B

    I hate my WD45 seat

    I hate my 1953 WD45 seat and find it very uncomfortable and being only 5'7, I have a hard time reaching the clutch pedal and other levers and I also dislike the offset feature. Has anyone ever modified their WD45 with a better seat configuration? I really miss the comfort of my 8N and sitting...
  5. B

    Order of operations for ground prep

    What's the recommended order to prep virgin ground for a deer food plot? Plow, disc, cultivator? or plow, cultivator, disc? I have a 1953 AC WD45.
  6. B

    GOT THE AGE HOW OCCUPATION

    School Psychologist in Northern Minnesota and 48 8N owner with my brother on our deer land.
  7. B

    Low oil pressure

    I have a 48 8N that starts and runs perfectly and has plenty of power. I've run it for 5-6 hours straight plowing, discing, and mowing with no problems. It does not burn or use any oil. My question is this- when I first start up I have 20 pounds of oil pressure which goes down to zero in a short...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top