Recent content by Bill 1952

  1. B

    Tie rods for Allis Chalmers D14

    I had someone else do the work. He claimed he set the toe in to AC specs.
  2. B

    Tie rods for Allis Chalmers D14

    The new tie rods have grease zerks. Could there be something else causing the problem?
  3. B

    Tie rods for Allis Chalmers D14

    The tie rod ends were worn out on my AC D14. It has standard steering but steered fairly easy with the old tie rods. I tried two different after market suppliers. The tie rods I received from both of them make the tractor really difficult to steer. Are tie rods from an AGCO dealer still...
  4. B

    Replacement seat pan for Massey Harris 30 Row Crop

    I'm looking for a replacement seat pan for my Massey Harris 30 Row Crop. It is a two bolt pan. Bolt holes are 3.5" apart, center to center. I've only been able to find one bolt replacement pans online. Can someone point in the right direction. Thanks, Bill
  5. B

    Allis Chalmers D14 Power Steering

    Hello Everyone, I have a 1957 Allis Chalmers D-14 with manual steering. I'm wondering if it's possible and feasible to add power steering to it. If so, what would it cost for the parts and pieces and to have someone do it., as it's above my skill level. I would appreciate your input. Bill
  6. B

    Massey Harris 30 PTO Shaft Felt Washer

    Hello All, My Massey Harris 30 PTO has a felt wiper to ext to the oil seal on the shaft. That washer doesn't seem to be available any longer. Can anyone tell me where I can buy felt material to make a seal? My parts manual shows the seal as 5/16" thick. Thanks, Bill
  7. B

    Massey Harris 30 PTO oil seal

    Re: Massey Harris 30 Row Crop PTO Seal and Felt Washer Hello All, I was able to find the seal I was looking for and have it on its way. But I also need the felt washer that goes next to the oil seal. I haven't had any success so far. The old parts catalog I have shows the felt washer in two...
  8. B

    Massey Harris 30 PTO oil seal

    Hello All, I'm in need of the lipped oil seal for the PTO on my Massey Harris 30. Can anyone point me in the right direction? Thanks, Bill
  9. B

    BOLTS FOR FRONT WHEEL WEIGHTS ON MY ALLIS CHALMERS D14

    Hello All, I'm looking for the bolts for the front wheel weights on my AC D14. I need 3. Can anyone point in the right direction? Thanks, Bill
  10. B

    D14 Starter

    To all who responded, I found a local guy who had a housing that matched mine. He replaced the housing and installed new brushes while he had it apart. The old ones were "well worn". I appreciate the response from everyone. Thanks!:)
  11. B

    D14 Starter

    Thanks. Can you tell me what all is involved in converting the starter from 6 volt to 12 volt?
  12. B

    D14 Starter

    Thanks.
  13. B

    D14 Starter

    Hello All,My D14 had been converted to 12 volt before I bought it. Yesterday, the starter wouldn't work. I removed it and found the nose cone broken off. I'm wondering what caused this. I read somewhere that not being installed correctly could be a cause. I saw something about shims. I would...
  14. B

    Farmall 340 Row Crop Battery Cover

    The battery on my 340 sets right behind the operator's seat. I have seen batteries explode. I don't really want to experience acid burns on my back and neck. And the lid would be the best way to secure the battery in the box. And I'm trying to restore the tractor to show quality.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top