Recent content by Billy12

  1. B

    Case 1175 PTO Bearing

    Im having trouble posting an image.
  2. B

    Case 1175 PTO Bearing

    My Case 1175 needs the PTO bearing replaced. I am struggling to get it out. Any suggestions for pulling it out of there? It is much more tight on the inside race where it is on the "sleeve". This tractor has the dual speed PTO for reference. SO far I have tried hooking it out with a pry bar...
  3. B

    Farmall 560 overhaul vs engine transplant

    Im not sure of the condition of the radiator at this point, although I regularly spray out the radiator externally. Also the temp gauge has not worked for the past couple years. I also have an uncle about 150 miles from here that I may just take the engine to for the rebuild. He has a repair...
  4. B

    Farmall 560 overhaul vs engine transplant

    Thank you. I think were gonna rebuild this one. Yes I will need to look into getting stands and a hoist if Im gonna do it myself.
  5. B

    Farmall 560 overhaul vs engine transplant

    Thanks John, I would love to do it myself. Perhaps I will do it myself. I've always wanted to do an overhaul I just would hate to mess something up because this is my dads pride and joy. Yes he has a decent budget so that also helps. I helped with a TA on an 886 last summer and that was about...
  6. B

    Farmall 560 overhaul vs engine transplant

    Thanks. My biggest concern is pulling the engine apart and finding a cracked head or something. It sounds like most people think its better to fix what I have rather than gamble on a used engine.
  7. B

    Farmall 560 overhaul vs engine transplant

    Thats correct it is "as is". But I am told it runs for what ever that is worth.
  8. B

    Farmall 560 overhaul vs engine transplant

    It is number four or five I do not remember exactly. I could check if it matters?
  9. B

    Farmall 560 overhaul vs engine transplant

    My dad has a Farmall 560 with the C263 and it is a rough running tractor. Fouls spark plug in one cylinder, low compression in that cylinder, burns lots of oil and recently started pressurizing the cooling system. I am not comfortable doing an engine overhaul myself but I could do an engine...
  10. B

    Case Magnum 7130 4WD

    okay good to know. Thank you.
  11. B

    Case Magnum 7130 4WD

    Hi all, I need a 7130 4WD transported 675 miles to my residence. What is an appropriate quote? So far the lowest I have gotten is $2.67 per mile. I was thinking $2 max... What do you advise??
  12. B

    Unknown model Case 4 bottom

    Yeah that sounds very accurate but still better than breaking a share every time you hit a rock. What types of plows do you prefer to run then?
  13. B

    Unknown model Case 4 bottom

    Is there anywhere I could look for that type of hitch? This plow literally has a wagon hitch welded onto it so there is no give at all.
  14. B

    Unknown model Case 4 bottom

    Hi all, I have an old case trailer plow that I do not know the model of. Someone told me it is a Case model G from the late 50's but I have not found any information on this model anywhere. There is no serial number tag located anywhere on the plow. I am also wondering what type of trip...
  15. B

    Case Plow Pull Easy?

    I have an old case 4 bottom trailer plow with four 16's I believe, and I think it is a fantastic plow. Plenty of clearance and does a great job digging into hard ground. I cant say that I think it pulls easy but I have only really used one other plow in my life and that was an IH fast hitch...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top