(800) 853-2651
SHOP NOW

Recent content by Bo dawg

Yesterday's Tractor Forums
  1. B

    What model loader do I have?

    I like to tare into myself but may take it somewhere instead. Lol
  2. B

    What model loader do I have?

    No problems with it other than a leaky cylinder. I just wanted to know what it was. This is my first tractor and loader Ive owned. Thank you for the info Caryc!
  3. B

    What model loader do I have?

    I see these loaders on the MF-202's, which is what I have, 1959 MF-202, but don't know any actual info on them. Doesn't have a tag on it but there is a cast number on it, 621-5389. Not sure if that helps.
  4. B

    202 grill thickness?

    Yes, that's what Im going to do but cant find any 1/4" perforated steel unless I special order it. I just want a cut off piece of scrap that will fit.
  5. B

    Need correct water temperature gauge/probe for MF-202

    I looked on YT at their temp gauges and their too long and the diameter to big around. The .370" I think is too big for mine. My old probe just fits in a 11/32" hole, and is 1" long from flange to tip. Also the thread hole is the same size as the small fitting on the probe. The bigger fitting...
  6. B

    Need correct water temperature gauge/probe for MF-202

    Alright I give up. I bought that Heritage water temp gauge and the probe on it is too big in diameter to fit. It fits into a 3/8" hole and my old one fits into a 11/32" hole. That's the problem I'm running into is the probe being too big around. Why isn't there a correct replacement? (banging...
  7. B

    202 grill thickness?

    Its called Nolts in Newville, PA. 717-776-6242
  8. B

    202 grill thickness?

    I'm hoping to find a piece of scrap perforated steel big enough to work with out buying a new piece. That thick of stock isn't cheap. I found a junk yard that has the factory grill for $150 and then with shipping cost it just seems too crazy so hoped I could make one cheaper and still look close...
  9. B

    202 grill thickness?

    Alright, thank you sir! Yes I have all the dimensions and made a template already. I know how the piece looks, I just didn't know the thickness and size of holes. I was guessing approximately 3/16" thick with 1/2" holes.
  10. B

    202 grill thickness?

    I need to make a replacement grill for my 202, I want to use the perforated steel like the original. Anyone know how thick is the plate MF used? And what size holes?
  11. B

    Need correct water temperature gauge/probe for MF-202

    Hey Wayne, heres one I found on AG Crazy website for $38 massey parts jacks website had it for $53. https://agcrazy.com/30v3485587-temperature-gauge I do like the smaller fitting adaptor (3/8" I think) same as smaller fitting on probe which will extend it out more if probe is too long. The...
  12. B

    Need correct water temperature gauge/probe for MF-202

    I looked at them too but the probe was longer than mine, and at 1" long seats up with no room for anything longer. It fastens up from bottom side of thermostat housing with the smaller fitting. Thanks Bo
  13. B

    Need correct water temperature gauge/probe for MF-202

    Thank you Wayne, I will do that. The place I called was Macallister in IN. which on Agco website said was the nearest to me. Probably not a good place to call. I did locate one last night on the internet, Heritage brand, man their pricey. Lol, I'm going to check your connection too and go with...
  14. B

    Need correct water temperature gauge/probe for MF-202

    Also that last number when I look it up is for a Minneapolis Moline tractor.
  15. B

    Need correct water temperature gauge/probe for MF-202

    I appreciate that info, and I call Agco today in Indiana and they don't have it. When they pull the numbers up its for a MF combine and electric or one with just an 18" lead/cable. He did recognize the 30-3485587 but cant get it.
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top