Recent content by bob57

  1. B

    Case model D serial ID / need pwr steering

    Can you get a good picture and post it here?
  2. B

    960 Power Steering Cylinder Seals

    Greetings. I started rebuilding those Bendix cylinders several years ago, and have been able to save them with new parts that i had manufactured at the machine shops.You may contact me anytime. Bob Hunter 580-603-0063
  3. B

    Oops

    Very good !Good luck to you !
  4. B

    Oops

    If they honed on the cylinder for a long time, it became oversized and will not hold pressure.I have those in stock along with many other new parts.I have rebuilt many cylinders over the years.Let me know if I can help. Bob
  5. B

    Oops

    If they honed on it for quite awhile, that took away material and made the cylinder oversized which causes fluid to slip by.I have new cylinders and other parts for the steering cylinders which I have had built.I rebuild the steering cylinders in my shop.Best wishes, Bob
  6. B

    How to lift loader on dead tractor to move

    Old hit the nail on the head!I bought a Case 310B several years ago with a locked up engine, so I tied a come along to the front end loader back to the roll bar then another to the backhoe and roll bar.sucked them both up and chained them together for the trip home.
  7. B

    Cas 410B Power Steering Cylinder and Valve

    If it has Bendix on the bottom of the spool valve housing, I have the parts for those and can rebuild it for you.Bob Hunter, 580-603-0063 North Central Oklahoma
  8. B

    Cas 410B Power Steering Cylinder and Valve

    Thanks to Joe for the recommendation.Yes I am still rebuilding the Bendix cylinders.
  9. B

    Power steering leaking

    Yes, I have the parts for those.It will require a little surgery on the end where the seals are to take it apart and check the piston and rod, ring, and replace the gland seals, then install a sleeve that has a threaded cap for the next service. Bob Hunter 5807 E Hayward Rd Waukomis, Okla 73773...
  10. B

    Power steering leaking

    PLEASE SEND ME A PICTURE OF YOUR CYLINDER
  11. B

    Power steering leaking

    Couldn't find your picture.Please try again.Thanks Bob
  12. B

    Power steering leaking

    Can you post a picture of the cylinder?If it is a Bendix, I may be able to help you. Bob
  13. B

    Case 500 Pwr steering cylinder overhaul

    I think there was a change at some point and yours looks like a newer style.I think yours goes down the side of the tractor doesn't it? The bendix models go across the front axle.Best wishes. Bob
  14. B

    Case 500 Pwr steering cylinder overhaul

    Post a picture and let's take a look.If it is a Bendix cylinder used on 300, 400 and 500 it will have the name under the spool valve.I rebuild those in my shop. Bob
  15. B

    Power steering cylinder

    I might be able to help you.Can you post a picture of the steering cylinder?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top