Recent content by bubsdad

  1. B

    NAA GOVERNOR

    I am switching to the conerweight governor and bought the kit to update the governor rod end and springs. what is the second spring that is included in the kit for? one goes on the new rod end but where does the other one go?
  2. B

    M hydrolics

    I have a log splitter I run with the hydrolics off my M. the pressure is not much and the hydrolics keep shutting off. Even when the splitter returns to rest it kicks off the pump. Is there a way to boost the pressure, raise the kick put pressure or both??
  3. B

    420 Air Cleaner Hose

    The NAPA hose I used is part #24717. I had to trim both ends but it works and is less than $20
  4. B

    420 Air Cleaner Hose

    Thanks for the info, my local JD dealer wants $65 for one of those hoses. I have a hose comming from NAPA tomorrow that is a fuel filler hose. I will let everyone know wheni get it and try it how it worked out. Thanks again
  5. B

    420 Air Cleaner Hose

    Anyone know of a aftermarket source for the 2 inch id hose from the carb to the air cleaner? I have looked at some parts houses but the 2 inch hose is not too popular and the 90degree bend is even tougher. Thanks
  6. B

    420 TIMING MARKS

    When the timing marks on the cam and crank are aligned on a 420 is the pistom at TDC? Mine is not and I am not sure looking at the manual if that is correct. Thank you for any insight.
  7. B

    Cub Temp Gauge

    I just bought a 1948 Cub and it does not have a temp gauge, there is a metal plate where it looks like the gauge would be. I this normal? I guess if it overheats the driver will be the first to know.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top