Recent content by calahan

  1. C

    MF 200 Loader

    Just confirmed, 32 loader uses the same seal
  2. C

    MF 200 Loader

    Correction, loader 35,,,,not 32
  3. C

    MF 200 Loader

    I noticed it pulls up model 32 loader ?
  4. C

    MF 200 Loader

    Update: With the help from a good paint remover, I discovered the numbers. Tilt cylinder>>> # 1605004M94 :D
  5. C

    MF 200 Loader

    Could use some help on the Massey Ferguson 200 Loader, The Tilt cylinders need new seals. I removed all the paint on the cylinders and this is the only number stamped on mine . >> RR 64 14 << Does anybody have information / or cylinder number ? Or , a correct oem...
  6. C

    MF 202 Work Bull

    The backhoe is currently using the front pump for the loader. Problem is the backhoe does not respond properly, Very slow and some cylinders very weak. Note: Loader has 2 small leaks. My next test will be by-passing the loader and connect the pressure line directly into the backhoe. If...
  7. C

    MF 202 Work Bull

    Type error >>>>>>>>>> PTO
  8. C

    MF 202 Work Bull

    Thanks, There no 3-point on it. My thoughts were adding an additional Hyd. Pump at the PTO for the already attached Davis 210 backhoe.
  9. C

    MF 202 Work Bull

    Just purchased a 1965 MF202. Question: The PTO rear has a plate over it? Can i remove the plate and connect to a PYO ?
  10. C

    MF 202 Work Bull

    Just purchased a 1965 MF202. Question: The PTO rear has a plate over it? Can i remove the plate and connect to a PYO ?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top