Recent content by Cisco

  1. C

    Farmall H, what mounts here?

    That's great, I like that idea.
  2. C

    how to tell if not charging is a generator or a regulato

    You might have to polarize the generator field. Here is a link to an article regarding Delco 6v positive ground. http://fergusontractors.org/nfs/wp-content/uploads/technical-articles/Polarizing-a-Generator.pdf
  3. C

    Farmall H, what mounts here?

    Excellent, I don't plan to attach row cultivators.
  4. C

    Farmall H, what mounts here?

    That is an interesting setup for a harrow. Thanks for the reply.
  5. C

    Farmall H, what mounts here?

    What are these mounting holes on the steering bolster used for?
  6. C

    Flexible garden hose

    Our local Sears Home Store sells Craftsman hose. They're excellent.
  7. C

    gasket sealer

    That's a good rule-of-thumb, don't glue to the block. I've always been a Gasgacinch fan. A thin coat on the pan and a thin coat on the gasket. Let it skin over for 15-20 minutes, then carefully fit the gasket to the pan. Once they come together, they're bonded. I've always used a heavy grease on...
  8. C

    Reusing head gasket

    My HS shop teacher used flat white paint because it was made with zinc oxide. I'd go with Copper Coat too because it is a light bodied rubber cement with copper. It won't weld your head to the block.
  9. C

    Reusing head gasket

    No, I have never tried that, and I wouldn't recommend it. I suppose you could reuse the head gasket (if it's in good shape). The crush rings are already crushed but could still seal the cylinders. I have re-used a gasket on the head of a GM 235. Try using copper spray gasket sealer. Re-check the...
  10. C

    Farmall H break pivot shafts

    I hope I can get out the rusted bolt without breaking it. I will have to chase the threads anyway. It would be nice to get original square head bolts, but like you say, anything that fits will work. I don't think they are 3/8ths, possibly 5/16ths? Thanks for the reply.
  11. C

    Farmall H break pivot shafts

    I got the pivot shafts and adjustment clevises cleaned and freed up. Thanks for mentioning the one turn of the clevis is about equal to 1/8" pedal travel.
  12. C

    2022.03.24 Rust Pic

    There is a lot to be salvaged there. I see something next to it, what's that? It is a great picture. ;-)
  13. C

    Farmall H break pivot shafts

    Thanks, I book marked their site for future reference.
  14. C

    Farmall H break pivot shafts

    I didn't know what the little bolt on the bottom of the break cover was for. I stumbled on a post that explains that they prevent the brake band from dragging. On one side of my H, the bolt is missing, and the other is frozen. I will replace them with new bolts and jam nuts.
  15. C

    Farmall H break pivot shafts

    Oh man, I should have ordered them from YT. Could have save some green. I didn't see them in the brake parts section. I'll know to use the site search next time. :-/ This post was edited by Cisco on 03/23/2022 at 05:25 pm.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top