Recent content by cjburke42

  1. cjburke42

    JD 1650 weak 3pt once warm

    Seal in and problems gone. Also bushhog stays up after engine off. Pump lives to see another day! Thanks for the support! @Tx Jim i owe you one you have came in with solid humble words of advice on both of my tractors I appreciate you
  2. cjburke42

    JD 1650 weak 3pt once warm

    Piston seal less than satisfactory
  3. cjburke42

    JD 1650 weak 3pt once warm

    Couple of side note tests that may be tell tell signs of other things 1. Will raise the implement without issue cold and hold while engine is running 2. When 3pt is raised and engine is turned off it instantly drops (this would be there effect of worn rockshaft piston/seal) right?
  4. cjburke42

    JD 1650 weak 3pt once warm

    No that is a paper weight for tht machine. Great hp and feel with the 4wd. I'd buy another in a heartbeat
  5. cjburke42

    JD 1650 weak 3pt once warm

    So pulled the screen... not so bad small metal flakes looks similar engine break in style residue Cut oil filter open as well and very clean.
  6. cjburke42

    JD 1650 weak 3pt once warm

    1st picture Raised at cold start. Held this position for 20min. Lowered and 2nd picture was highest it would raise warmed up. So it did not bleed off while running
  7. cjburke42

    JD 1650 weak 3pt once warm

    Got it! Im going to cut the filter today to inspect the old filter condition. Ill get pictures of the screen.
  8. cjburke42

    JD 1650 weak 3pt once warm

    Can filter changed yesterday. Screen will come out today it was really dirty on the housing so I didn't pull yet. But troubleshooting thought on that would be why works cold but not warm? If blocked should be no working at all times
  9. cjburke42

    JD 1650 weak 3pt once warm

    JD 1650 2900 hrs At 1st start up tractor will pick up 8ft bushhog all the way up. 10-15min in once warm will pick up just enough to raise bushhog tires off the ground. Changed hydraulic filter but same. My thought would be the rockshaft piston seal based on high viscosity cold fluid lifts...
  10. cjburke42

    What brand Canopy is this???

    I have seen these around, and would like to get one for my tractor... any idea on who makes this style canopy? Thanks
  11. cjburke42

    JD 1530 _ FEL & 3pt issue

    Yes tht wasnt checked for sure... but 73 cent oring later at an old parts store and I am back in action. Thanks for the support guys. Problem solved!
  12. cjburke42

    JD 1530 _ FEL & 3pt issue

  13. cjburke42

    JD 1530 _ FEL & 3pt issue

  14. cjburke42

    JD 1530 _ FEL & 3pt issue

    Looks like correct valve with a quarter of the oring it needs
  15. cjburke42

    JD 1530 _ FEL & 3pt issue

    Ok I am not finding any results for just the o ring part # on google. I didn't know what Items 12B and 12C description were. In a few places of green chipped paint I see red so I am beginning to wonder if it is a open center and the project was just never finished correctly.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top