Recent content by Cliff1855

  1. C

    600 International

    What engine is in a gas and diesal 600 international?
  2. C

    revisiting the 1750 you all helped me with

    We got everything working on a tractor that had set five years, but it jumps out of fifth and sixth gear. Suggestions? Thanks for the help.
  3. C

    1750 project (again)

    While cranking to get a fuel injection pump to prime, oil came out of the steering motor. The whole bottom is busted out of it. The question is where will we find a good steering motor? Thanks again.
  4. C

    ongoing 1750 project

    To answer your reply: By the time I was done taking it off, I had a pile of ground and bent wrenches in the floor and I thought the experts might have a solution to my grief. As it turned out, the used pump we bought doesn't work either. And we discovered the steering assembly on the dash is...
  5. C

    ongoing 1750 project

    We finally got the injector pump off. My question now is this: What kind of wrench do I need for the back stud? It's impossible to get to, with a regular wrench. Thanks.
  6. C

    Follow-up on 1750 fuel problem

    Thanks guys. You're the best. I found it.
  7. C

    Follow-up on 1750 fuel problem

    Finally the mud dried up enough to go get the tractor; it was 30 miles away. You guys were spot-on about the problem: The injection pump was gummed up. The new problem is how to remove it when I can't find the timing mark in the sight window. Thanks for your help.
  8. C

    1750 diesel

    This tractor has set for five years. We put fresh diesel in it. Primed it to the pump, but we can't seem to get the diesel past the pump. We cracked the lines and hand-primed and cranked, to no avail. How do we check the injector pump to see it it's working? Thanks in advance.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top