Recent content by covert42

  1. D

    Baling Soybeans?

    Its been a long time ago. Mid - late 70's I think; but I remember my dad baling Soybeans. I cant remember the circumstances, dont remember if it was cut with a NH 489 haybine, or a NH sicklebar mower. I do however remember the dust when it was...
  2. C

    tachometer

    Steiner sells a complete new set up for 270
  3. C

    Z134 head on Z120 Engine?

    My TO20 has a Z134 head. Are these parts compatable?
  4. C

    Overhauling TO20

    Thanks for the advice I will let you all know how it turns out?
  5. C

    TO30 Engine Overhaul Kit on a TO20

    yes the pistons I have are the 3 3/8 can I put this in a to20 with no worries? and he told me valves where the same?
  6. C

    Overhauling TO20

    I am goan to start my engine overhaul this weekend, this is my first overhaul I have the Dealer Shop Manual. And The comprehinsive overhaul kit, are there any tips or certain steps I should not forget. What I don't understand is the Valve inserts.
  7. C

    TO 30 not runnin'

    Spark plug wires are in the wrong order I can almost garentee it. Same thing happened to me and I had an old tractor guy come over I could not figure it out for the life of me. With the tractor running at idle he pulled 2 leads off at a time and and moved them over the distrbuter holes the...
  8. C

    Re: WANTED: Original crank/starter handle for TEA20

    This site sales one 20 bucks in the parts area
  9. C

    Thermostat

    If I had to guess I would say 160 and 180 are the opening temps this site sells the 160 one. Im not sure I would want one that begins to open at 180 it might not fully open at the right time.
  10. C

    TO20 Tractormeter A-TO-93

    Found it at steiner all three parts meter cable and tach are $277 ebay curently has an original with all three parts plus the gen going for $150 right now. I would rather have the new one.
  11. C

    TO20 Tractormeter A-TO-93

    Thanks can you give me both site addresses
  12. C

    TO30 Engine Overhaul Kit on a TO20

    I have the comprehensive overhaul kit. The piston rods and crankshaft will be original. The tisco guy told me that the 30 and 20 use the same piston rods. What I was worried about was the long term effect on the crankshaft. My bearring sizes are piston rods .020 and mains .010
  13. C

    TO-30 Exhaust manifold

    If you do snap a stud you can buy replacement ones at a massey dealer, I find that WD40 and a torch help alot also for breaking loose old bolts.
  14. C

    '49 TO-20,6 Volt battery....where to get one...?

    TSC has the best deal in my opinion you get a 625CCA for 60 bucks, Nappa on the other hand carries a 650CCA for about 80-90 bucks. I always look at the CCA first then the price.
  15. C

    TO20 Tractormeter A-TO-93

    does anyone have knowlege if these are still in production. http://www.external_link/pdfs/MFS145.pdf I would love to have one
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top