Recent content by crowsnest2002

  1. crowsnest2002

    Oliver OC 46

    Oliver oc 46 loader attachment dimensions. For reference for anyone trying to fabricate or purchase a loader attachment such as pallet forks.
  2. crowsnest2002

    Oliver OC 46

    The oliver oc 46 is handling everything I keep throwing at it within reason and its ability anyway. Ive been clearing out trees and opening areas in the forest. It works well in the woods with its compact size.
  3. crowsnest2002

    Oliver OC 46

    Taking some time today to really use the OC 46 to dig in the dirt.
  4. crowsnest2002

    Oliver OC 46

    I already have a spare. Seems like a carb rebuild kit wouldnt hurt either in the future.
  5. crowsnest2002

    Oliver OC 46

    Little oliver oc 46 is a beast for setting up the sawmill pad. I'll have to think of a way for it to skid logs though. Its not a long distance driver.
  6. crowsnest2002

    Oliver OC 46

    Time to eat crow. The problem was not the pump at all. I started testing everything as far as flows. The culprit was the inline filter you see in the photo. It was causing such a pressure issue it wasn't pumping correct because it is a low pressure pump. Then it wasn't filling the...
  7. crowsnest2002

    Oliver OC 46

    So, definitely a pump issue. I got 5 gallons of fuel, dumped it in. Started right up. It seems like the pump is not lifting the fuel as it should. So for now im going to dump fuel in it until I have a good moment to tear the pump apart. Too many projects. Right now its acting like a...
  8. crowsnest2002

    Oliver OC 46

    Sounds like a tear down. I was thinking it might be one of the valves. I did replace with the kit valves. I'll try to tear down the pump this week and I'll give an update
  9. crowsnest2002

    Oliver OC 46

    Did some tests on the fuel while I had it out and it did it again. Fuel tank was between 1/4 to 1/3. Same thing as last time, not getting fuel. I rebuilt the fuel pump cause it had a cracked rubber gasket. I blew out lines, flow when I put it back together. Put Sediment bowl back on...
  10. crowsnest2002

    Oliver OC 46

    I think im going to look into the fuel issue some more. Ill update then.
  11. crowsnest2002

    Oliver OC 46

    So, with the fuel system on oc46, its gravity fed until it gets to the fuel lifter (pump). If your tank is low in fuel, and it is at an angle to where the Sediment bowl is higher than the fuel level of the tank it will not fill the bowl and keep the pump primed. I filled an air tank, blew out...
  12. crowsnest2002

    Oliver OC 46

    Im starting to see a trend here. Ive been using the oc 46 pretty hard the last while, and over rough terrain. Seems like im getting more crud out of the tank into the Sediment bowl and lines. I have a plug on the elbow at where the line goes into Sediment bowl. I didn't have compressed air...
  13. crowsnest2002

    Oliver OC 46

    I had to clean the Sediment bowl out over the weekend. Unfortunately I had to remove wires off the distributor cap to do it. Then I lost track of wire order. Anyway key term search for anyone needing it. Oliver oc 46 4 cylinder plug wire to distributor cap order. See attached picture
  14. crowsnest2002

    Oliver OC 46

    So took the crawler out for about 30 min. I let it warm up for about 10 minutes and started working it. Mostly down hill to see what would happen. Temp gauge got close to work on the gauge, but mostly hung around in the upper cool zone. The tooth bar, wow. Huge difference. I can really get...
  15. crowsnest2002

    Oliver OC 46

    I appreciate the compliment. Thank you. I hope someone from the future can glean something out of this thread to be honest.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top