Recent content by Cumminsdeere

  1. C

    Tractor safety and WF vs NF ( Release the HOUNDS!)

    :Buy the time you lean a wide front far enough that the front wheels ketch ya its time for new shorts ive been that steep before but I'm glad its up there anyway I wouldn't want a narrow front where I farm
  2. C

    rusty metal

    Is it just me or do these look like they been starting to brake for awhile ?
  3. C

    3020 damper

    Thanks guys that's what I did I Gota longer bolt and drew it on
  4. C

    miller welder

    Well I.cleaned the plugs both male and female and still will only weld for about an inch and then it stops . I read in the manual that your are supposed to wrap the cable ends with copper foil and I didn't do that so I guess I'll try that next
  5. C

    3020 damper

    I got it off im more concerned about getting the new one back on
  6. C

    Hey,Bryce Frazier...

    closeup of needles it looks like there is rust inside the break on the one but you couldn't have seen it till it broke
  7. C

    3020 damper

    Tips and tricks to replace the damper on 3020 John Deere? Tia.
  8. C

    battery boxes

    Must be so I'm looking at the wrong part number?
  9. C

    miller welder

    Thanks ya I've down loaded one and they are good manuals wish everybody had free operator manuals
  10. C

    miller welder

    Thanks for the reply ya there a switch and also 3 different throttle settings on it for welding and power .dumb question what is good to clean the plugs with? Emery cloth?
  11. C

    miller welder

    Anyhbody know much about these old welders? Finally got it running today and will only weld a couple inches then it stops runs a grinder fine so ground the spot for ground cable seemed to help some .
  12. C

    Just Too Wet!

    I wish I had your problems I drilled on March 27 and It was dry as he$! Then . if we don't get some rain we won't get a dry land crop again
  13. C

    battery boxes

    Wonder why my. Cost is. Coming up so high
  14. C

    battery boxes

    Its an early model my price shows up over 400 dollars each
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top