Recent content by daniel pendzick

  1. D

    bought some 1/2 cable 6 X25 aircraft grade cable?

    look up the breaking strength of that cable and the safe working load is 1/5 of that. you would be better off digging around the roots of the tree so it would come down with a lot less of a pull, and of course have nothing within striking distance of the tree in any direction!!--yes-i have had a...
  2. D

    Cat D3B

    Also i have been using Sam's club AW46 hydraulic oil in all of my machines hydraulic systems for over 20 years and it has served me well.
  3. D

    Cat D3B

    Not gear oil--the manual calls for sae 30 motor oil for the bevel gear,track rollers and final drives. Also sae 30 oil for the engine for a temperature range of 20* to 120*--otherwise lighter oil for temps lower than 20* Cat calls these oils CD mil-l-2104c
  4. D

    Float decking lumber

    2" thick decking as compared to 1.5" decking of the same species is 78% stronger for bending moment and 33% stronger for shear---the working stress allowable for the species your using will also figure in--i would say the oak is by far superior to pressure treated S4S pine and if you have a...
  5. D

    Cat D3B

    my maintenance manual for my D3B calls for sae 30 for the bevel gear for all temperature ranges
  6. D

    International 500c Dozer/Crawler

    I live on LI in NY but my machine is in Mass, Not a mechanic per say--but i have owned my 500c for 13 years and have the service and parts manuals which i use a lot.
  7. D

    International 500c Dozer/Crawler

    This message is a reply to an archived post by JOELV on August 14, 2008 at 17:40:41. The original subject was "Re: International 500c DozerCrawler". the linkage adjustments are critical to have the steering clutch disengage and then for the brake band to apply--there are seperate adjusting...
  8. D

    international 500c

    looking for a 500c somewhere in the northeast usa. totaled out mine a few days ago by dropping a tree on it.
  9. D

    International 500c Dozer/Crawler

    This message is a reply to an archived post by Sterling on August 14, 2008 at 16:51:35. The original subject was "International 500c DozerCrawler". your right side cluch needs adjusting or it is not engaging at all
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top