International 500c Dozer/Crawler

This message is a reply to an archived post by JOELV on August 14, 2008 at 17:40:41.
The original subject was "Re: International 500c DozerCrawler".

the linkage adjustments are critical to have the steering clutch disengage and then for the brake band to apply--there are seperate adjusting screws for each operation--1 1/4" free play on the steering levers, this is adjusted by the ball end link under the inspection cover--then adjust brake linkage lever by adjusting bolt on top of cover to 1/4" clearance
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top