Recent content by dgraham

  1. D

    8N just quit after 3 hrs running

    My 8N did the same due to needle valve intermittently sticking. Try lightly tapping on the carb with a hammer, mine started right up. New carb fixed the issue.
  2. D

    OC4 tracks

    I bought a tractor project that has OC3 trans/rear, OC4 track frames and the rest custom made. The tracks have 33 links instead of the normal 32 for an OC4, so adjustment is all the way out and still sag. After I get the master pin out, what is the best method to remove a link? Will I be able to...
  3. D

    8N remote hydraulics

    Thanks, just wanted to verify how it was internally connected. A few years ago I installed a backhoe on a Yanmar, and the quick connect fitting failed, blocked the line and blew the weak link which was the backhoe valves.It now has a relief valve.
  4. D

    8N remote hydraulics

    The hose from the top fitting wraps around the back of the seat and goes down to the test port. Yes, I think JMOR explained it.
  5. D

    8N remote hydraulics

    Picture of hydraulic tap under seat:
  6. D

    8N remote hydraulics

    I recently purchased a 1950 8N, and have a question about the hydraulics. There are 2 taps in the case, 1 on the top of diff and other under the seat. There is a hose connected from the test port to the tap under the seat. I believe this modification was done to add a remote cylinder and not...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top